Audio-Technica U853PMWU
UniLine Line-Cardioid Condenser Microphone in White

OUR PART #  U853PMWU


The white-finished version of U853PMU, the U853PMWU UniLine condenser hanging microphone features Audio-Technica's UniLine line-cardioid element and comes equipped with a wall/ceiling plate power module for permanent installation in a standard, single-gang electrical box. The phantom-powered microphone is equipped with UniGuard innovations that offer unsurpassed immunity from radio frequency interference. It accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine line cardioid polar patterns. Its 80 Hz low-cut UniSteep filter reduces pickup of low-frequency ambient noise.

Features:

  • Designed for suspension over choirs, instrumental groups and theaterstages
  • Wall/ceiling plate power module permits permanent installation in standardmetal U.S. single gang electrical box
  • Superior off-axis rejection for maximum gain before feedback
  • UniLine polar pattern provides narrow 90° acceptance angle
  • UniGuard RFI-shielding technology offers outstanding rejection of radiofrequency interferenece (RFI)
  • UniSteep filter provides a steep low-frequency attenuation to improvesound pickup without affecting voice quality
  • Accepts interchangeable elements to permit angle of acceptance from 90° to360°
  • Low-profile design with low-reflectance finish for minimum visibility

Specifications:

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Line Cardioid
  • Frequency Response: 30-20,000 Hz
  • Low Frequency Roll-Off: 80 Hz, 18 dB/octave
  • Impedance: 200 ohms
  • Max Input Sound Level: 124 dB SPL
  • Dynamic Range (typical): 102 dB
  • Signal-to-Noise Ratio: 72 dB
  • Phantom Power Requirements: 11-52V DC
  • Switches: Flat, roll-ovv; 0dB/+10dB gain setting
  • Weight (microphone): 1.1 oz
  • Weight (power module): 3.4 oz
  • Dimensions (microphone, L x D): 6.14" x 0.48"
  • Dimensions (power module, W x H x D): 2.8" x 4.55" x 1.42"
  • Output Connector (power module): Screw terminals
  • Cable: 25' long (permanently attached to microphone, 0.13" diameter,2-conductor, shielded cable with TA3F-type connector
  • Optional Interchangeable Elements: UE-C cardioid (120°); UE-Hhypercardioid (100°); UE-O omnidirectional (360°)
  • Furnished Accessories: AT8154 two-stage foam windscreen; AT8451 steelhanger; AT8534 wall/ceiling plate power module; AT8438 5/8"-27 stand adapter
  • Audio-Technica Case Style: M32
Custom Stand Adapter for AT853 and AT853W
Audio-Technica AT8438 Custom Stand Adapter for AT853 and AT853W
Custom mount allows using miniature hanging and lavalier microphones in surface-mount applications. Fits 5/8"-27 thread stands. Adapter for the AT853 and AT853W microphones.
Windscreen, Two-Stage Foam, White
Audio-Technica AT8153WH Windscreen, Two-Stage Foam, White
Fits Audio-Technica Case Styles: M2, M12, M34
Metal Windscreen
Audio-Technica AT8160 Metal Windscreen
 Metal windscreen with internal pop protection (black). Fits Audio-Technica Case Style(s): M2, M12, M22, M23, M34

Usually ships in 7-14 business days.
Need it sooner? Call us!
Wire Microphone Hanger Adapter, White
Audio-Technica AT8451-WH Wire Microphone Hanger Adapter, White
Wire hanger adapter for overhead applications (white).Fits Audio-Technica Case Style(s): M12, M21, M32

Usually ships in 7-14 business days.
Need it sooner? Call us!

Audio-Technica U853PMWU
UniLine Line-Cardioid Condenser Microphone in White

OUR PART #  U853PMWU

Product Information:

The white-finished version of U853PMU, the U853PMWU UniLine condenser hanging microphone features Audio-Technica's UniLine line-cardioid element and comes equipped with a wall/ceiling plate power module for permanent installation in a standard, single-gang electrical box. The phantom-powered microphone is equipped with UniGuard innovations that offer unsurpassed immunity from radio frequency interference. It accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine line cardioid polar patterns. Its 80 Hz low-cut UniSteep filter reduces pickup of low-frequency ambient noise.

Features:

  • Designed for suspension over choirs, instrumental groups and theaterstages
  • Wall/ceiling plate power module permits permanent installation in standardmetal U.S. single gang electrical box
  • Superior off-axis rejection for maximum gain before feedback
  • UniLine polar pattern provides narrow 90° acceptance angle
  • UniGuard RFI-shielding technology offers outstanding rejection of radiofrequency interferenece (RFI)
  • UniSteep filter provides a steep low-frequency attenuation to improvesound pickup without affecting voice quality
  • Accepts interchangeable elements to permit angle of acceptance from 90° to360°
  • Low-profile design with low-reflectance finish for minimum visibility

Specifications:

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Line Cardioid
  • Frequency Response: 30-20,000 Hz
  • Low Frequency Roll-Off: 80 Hz, 18 dB/octave
  • Impedance: 200 ohms
  • Max Input Sound Level: 124 dB SPL
  • Dynamic Range (typical): 102 dB
  • Signal-to-Noise Ratio: 72 dB
  • Phantom Power Requirements: 11-52V DC
  • Switches: Flat, roll-ovv; 0dB/+10dB gain setting
  • Weight (microphone): 1.1 oz
  • Weight (power module): 3.4 oz
  • Dimensions (microphone, L x D): 6.14" x 0.48"
  • Dimensions (power module, W x H x D): 2.8" x 4.55" x 1.42"
  • Output Connector (power module): Screw terminals
  • Cable: 25' long (permanently attached to microphone, 0.13" diameter,2-conductor, shielded cable with TA3F-type connector
  • Optional Interchangeable Elements: UE-C cardioid (120°); UE-Hhypercardioid (100°); UE-O omnidirectional (360°)
  • Furnished Accessories: AT8154 two-stage foam windscreen; AT8451 steelhanger; AT8534 wall/ceiling plate power module; AT8438 5/8"-27 stand adapter
  • Audio-Technica Case Style: M32
Custom Stand Adapter for AT853 and AT853W
Audio-Technica AT8438 Custom Stand Adapter for AT853 and AT853W
Custom mount allows using miniature hanging and lavalier microphones in surface-mount applications. Fits 5/8"-27 thread stands. Adapter for the AT853 and AT853W microphones.
Windscreen, Two-Stage Foam, White
Audio-Technica AT8153WH Windscreen, Two-Stage Foam, White
Fits Audio-Technica Case Styles: M2, M12, M34
Metal Windscreen
Audio-Technica AT8160 Metal Windscreen
 Metal windscreen with internal pop protection (black). Fits Audio-Technica Case Style(s): M2, M12, M22, M23, M34

Usually ships in 7-14 business days.
Need it sooner? Call us!
Wire Microphone Hanger Adapter, White
Audio-Technica AT8451-WH Wire Microphone Hanger Adapter, White
Wire hanger adapter for overhead applications (white).Fits Audio-Technica Case Style(s): M12, M21, M32

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM