Turbosound RC-1213
Recone Kit for Turbosound LS-213 Driver

OUR PART #  RC-1213

Log In for price!

Don't have an account? Apply today!

Recone kit for LS-1213 woofer used in these Turbosound models:

  • TCS-12M
  • TCS-56
  • TCS-59

TCS-12M

  The TCS-12M is a passive two-way vented wedge monitor designed for use in a variety of speech and music floor monitoring applications. 

   It consists of a 12" low frequency driver and  a 1" high frequency driver on a 90° x 40° horn, matched with a third order internal passive crossover network.

  The TCS-12M enclosure has been designed with the high frequency horn mounted vertically in line with the LF driver. This produces a coherent dispersion pattern with minimum phase cancellation within the coverage pattern of the monitor. It is ideally suited for use as a church choir or theatre vocal monitor, or in other critical applications requiring accurate reproduction of voice and music. The HF horn pattern of 90° x 40° is wide enough to allow the artist horn, matched with a third order internal passive crossover network.

  The TCS-12M enclosure has been designed with the high frequency horn mounted vertically in line with the LF driver. This produces a coherent dispersion pattern with minimum phase cancellation within the coverage pattern of the monitor. It is ideally suited for use as a church choir or theatre vocal monitor, or in other critical applications requiring accurate reproduction of voice and music. The HF horn pattern of 90° x 40° is wide enough to allow the artist considerable lateral freedom of movement on stage without loss of information.

  The TCS-12M enclosure provides an optimum monitoring angle of 42°, and is constructed from 5/8” (15mm) birch plywood, finished in black semi-matt textured paint (other colours optionally available). Two flush handles are provided on the sides for lifting and carrying. A black powder coated perforated steel mesh grille is fitted to protect the drive units from damage. 

  Connection to the enclosure is via two parallel-wired Speakon NL4MP connectors.  These are wired in parallel to allow loop-out considerable lateral freedom of movement on stage without loss of information.

TCS-56

    The TCS-56 is a passive full range two-way loudspeaker enclosure designed for use in primary speech and music sound reinforcement applications.

  The loudspeaker complement consists of a custom front loaded 12” low frequency driver and a 1” high frequency compression driver on a 60° x 40° constant directivity horn, matched with an internal passive crossover network.

  The large format constant directivity horn exhibits excellent pattern control down to crossover frequency, making the TCS-56 ideal for use in arrays.  The high frequency horn is designed to be removed and rotated through 90°, to suit applications requiring a 60° x 40° dispersion in a horizontal box format.

    The trapezoidal enclosure is constructed from 5/8” (15mm) birch plywood, and incorporates M10 threaded internal steel rigging brackets which are designed to accept standard eyebolts and optional Turbosound mounting hardware, providing a simple and convenient method of flying the cabinet.

  A rear panel connector plate carries a single  Neutrik Speakon NL4MP and a 4-way terminal strip for loop in and loop out connections to additional enclosures.

Recommended complementary products:

TCS-40 downfill enclosure

TCS-108, TCS-215, TCS-118 subwoofer enclosures

LMS-D6, LMS-D4 loudspeaker management systems   

TCS-59

  The TCS-59 is a passive full range two-way loudspeaker enclosure designed for use in primary speech and music sound reinforcement applications.

 The loudspeaker complement consists of a custom front loaded 12” low frequency driver and a 1” high frequency compression driver on a 90° x 60° constant directivity horn, matched with an internal passive crossover network.

  The large format constant directivity horn exhibits excellent pattern control down to crossover frequency, making the TCS-59 ideal for use in arrays. 

  The trapezoidal enclosure is constructed from 5/8” (15mm) birch plywood, and incorporates M10 threaded internal steel rigging brackets which are designed to accept standard eyebolts and optional Turbosound mounting hardware, providing a simple and convenient method of flying the cabinet.

  A rear panel connector plate carries a single Neutrik Speakon NL4MP and a 4-way terminal strip for loop in and loop out connections to additional enclosures.

Recommended complementary products:

TCS-40 downfill enclosure

TCS-108, TCS-215, TCS-118 subwoofer enclosures

LMS-D6, LMS-D4 loudspeaker management systems

 

General Parts Questions

Question:
What do I do if my item still doesn’t work or has additional problems?
Answer: In most cases if your item has the same symptom or new symptoms it’s because the fault was originally misdiagnosed. Please be aware that we cannot be responsible for damages because of a misdiagnos......See more
Answer: In most cases if your item has the same symptom or new symptoms it’s because the fault was originally misdiagnosed. Please be aware that we cannot be responsible for damages because of a misdiagnosed fault, incorrect installation, or incorrect operation of your device.

If you’re not confident in your diagnosis it may be best to take your item to a qualified technician.

Question:
The part I purchased is defective or failed soon after my purchase. Does it have a warranty?
Answer: Possibly - some spare parts come with a warranty, typically with a shorter duration than the standard warranty for finished goods. In some cases manufacturers sell spare parts “as is” or won’t ......See more
Answer: Possibly - some spare parts come with a warranty, typically with a shorter duration than the standard warranty for finished goods. In some cases manufacturers sell spare parts “as is” or won’t consider an item eligible for return if the part isn’t installed by an authorized center.

If you’re concerned about the duration of a spare part warranty please contact us before placing your order. Be aware that if you install a part to repair an item that’s still under the manufacturer’s warranty you may void the warranty in your item by performing unauthorized repairs.

Question:
Can you help me diagnose my item?
Answer: In most cases it’s impractical to attempt a diagnosis without an item present along with the appropriate test equipment. If you’re not confident in your ability to diagnose the fault of your item;......See more
Answer: In most cases it’s impractical to attempt a diagnosis without an item present along with the appropriate test equipment. If you’re not confident in your ability to diagnose the fault of your item; it may be best to take your item to a qualified technician.
Question:
Am I ordering the correct part?
Answer: Check the product description to ensure your model is listed as compatible. Parts from the same manufacturer may seem compatible with your item but that isn’t always the case. If you find a ......See more
Answer: Check the product description to ensure your model is listed as compatible. Parts from the same manufacturer may seem compatible with your item but that isn’t always the case. If you find a part that appears to be a match for your item but your model isn’t listed - please contact us so we can confirm compatibility. It is possible that a part can fit more models than we have listed.

Parts appearance may vary from the original component depending on the manufacturer the vendor uses. Please be aware that we cannot be responsible for damages because of installation of an incorrect part. Unopened, uninstalled parts can be returned within 30 days.

Turbosound RC-1213
Recone Kit for Turbosound LS-213 Driver

OUR PART #  RC-1213

Product Information:

Recone kit for LS-1213 woofer used in these Turbosound models:

  • TCS-12M
  • TCS-56
  • TCS-59

TCS-12M

  The TCS-12M is a passive two-way vented wedge monitor designed for use in a variety of speech and music floor monitoring applications. 

   It consists of a 12" low frequency driver and  a 1" high frequency driver on a 90° x 40° horn, matched with a third order internal passive crossover network.

  The TCS-12M enclosure has been designed with the high frequency horn mounted vertically in line with the LF driver. This produces a coherent dispersion pattern with minimum phase cancellation within the coverage pattern of the monitor. It is ideally suited for use as a church choir or theatre vocal monitor, or in other critical applications requiring accurate reproduction of voice and music. The HF horn pattern of 90° x 40° is wide enough to allow the artist horn, matched with a third order internal passive crossover network.

  The TCS-12M enclosure has been designed with the high frequency horn mounted vertically in line with the LF driver. This produces a coherent dispersion pattern with minimum phase cancellation within the coverage pattern of the monitor. It is ideally suited for use as a church choir or theatre vocal monitor, or in other critical applications requiring accurate reproduction of voice and music. The HF horn pattern of 90° x 40° is wide enough to allow the artist considerable lateral freedom of movement on stage without loss of information.

  The TCS-12M enclosure provides an optimum monitoring angle of 42°, and is constructed from 5/8” (15mm) birch plywood, finished in black semi-matt textured paint (other colours optionally available). Two flush handles are provided on the sides for lifting and carrying. A black powder coated perforated steel mesh grille is fitted to protect the drive units from damage. 

  Connection to the enclosure is via two parallel-wired Speakon NL4MP connectors.  These are wired in parallel to allow loop-out considerable lateral freedom of movement on stage without loss of information.

TCS-56

    The TCS-56 is a passive full range two-way loudspeaker enclosure designed for use in primary speech and music sound reinforcement applications.

  The loudspeaker complement consists of a custom front loaded 12” low frequency driver and a 1” high frequency compression driver on a 60° x 40° constant directivity horn, matched with an internal passive crossover network.

  The large format constant directivity horn exhibits excellent pattern control down to crossover frequency, making the TCS-56 ideal for use in arrays.  The high frequency horn is designed to be removed and rotated through 90°, to suit applications requiring a 60° x 40° dispersion in a horizontal box format.

    The trapezoidal enclosure is constructed from 5/8” (15mm) birch plywood, and incorporates M10 threaded internal steel rigging brackets which are designed to accept standard eyebolts and optional Turbosound mounting hardware, providing a simple and convenient method of flying the cabinet.

  A rear panel connector plate carries a single  Neutrik Speakon NL4MP and a 4-way terminal strip for loop in and loop out connections to additional enclosures.

Recommended complementary products:

TCS-40 downfill enclosure

TCS-108, TCS-215, TCS-118 subwoofer enclosures

LMS-D6, LMS-D4 loudspeaker management systems   

TCS-59

  The TCS-59 is a passive full range two-way loudspeaker enclosure designed for use in primary speech and music sound reinforcement applications.

 The loudspeaker complement consists of a custom front loaded 12” low frequency driver and a 1” high frequency compression driver on a 90° x 60° constant directivity horn, matched with an internal passive crossover network.

  The large format constant directivity horn exhibits excellent pattern control down to crossover frequency, making the TCS-59 ideal for use in arrays. 

  The trapezoidal enclosure is constructed from 5/8” (15mm) birch plywood, and incorporates M10 threaded internal steel rigging brackets which are designed to accept standard eyebolts and optional Turbosound mounting hardware, providing a simple and convenient method of flying the cabinet.

  A rear panel connector plate carries a single Neutrik Speakon NL4MP and a 4-way terminal strip for loop in and loop out connections to additional enclosures.

Recommended complementary products:

TCS-40 downfill enclosure

TCS-108, TCS-215, TCS-118 subwoofer enclosures

LMS-D6, LMS-D4 loudspeaker management systems

 

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

HACKER SAFE certified sites prevent over 99.9% of hacker crime.