Audix ADX20-IP
Instrument Microphone

OUR PART #  ADX20-IP

Log In for price!

Don't have an account? Apply today!

The Audix ADX-20i is a pre-polarized condenser microphone designed to handle a wide variety of clip-on applications. The ADX20i is sonically superior as well as aesthetically pleasing and is ideally suited for saxophone, trombone, trumpet and other brass instruments. With a smooth uniform response over a frequency range of40 Hz – 20 kHz, the ADX-20i provides a rich, warm sound not typical of microphones this size. It is machined from solid brass and has a low reflective black e-coat finish. The ADX-20i operates on phantom power (9-52 volts) with the preamp module provided (APS-910). It may be used in battery mode with optional phantom power adapter (APS-911). The ADX-20i can be utilized with a wireless system. Depending on the brand of wireless and the connector configuration of the instrument body pack, the ADX-20i connector would need to be modified accordingly. Low noise electronic circuitry, and balanced low impedanceoutput allow for interference free performance even with long cable runs.

Audix ADX20-IP Features:

  • High tension spring clamp keeps mic in place
  • Multi-position gooseneck
  • Highly accurate sound reproduction
  • Available in hypercardioid version (ADX-20i/hc)

Audix ADX20-IP Specifications:

  • Transducer Type:  Condenser (pre-polarized)
  • Frequency Response:  40 Hz - 20 kHz
  • Polar Pattern:  Cardioid
  • Output Impedance:  250 Ohms balanced
  • Open Circuit Sensitivity:  5.2 mV
  • Equivalent Noise Level:  29 dB (A weighted)
  • Signal to Noise Ratio:  65 dB (ref 1k @ 1 Pascal)
  • Power Requirements:  9 - 52v phantom
  • Maximum SPL:  130 dB
  • Cable/Connector:  Shielded 6’ cable terminating to aminiature 3 pin XLR-f
  • Phantom Adapter:  Mini XLR male - XLR male
  • Polarity:  Positive voltage on pin 2 relative to pin 3 of output XLR connector
  • Housing:  Machined Brass
  • Gooseneck:  Flexible steel
  • Weight:  1.7 oz/4.7 grams (without cable)
Microphone Windscreen, 3/8" Inside Diameter (Black)
WindTech 1500-BLACK Microphone Windscreen, 3/8" Inside Diameter (Black)
Since 1976, WindTech has manufactured the highest quality American made microphone windscreens on the market. They are available in  25  brilliant colors, and a wide variety of shapes and sizes to fit most popular microphones. ...
Microphone Windscreen, 3/8" Inside Diameter (Black)
WindTech 1400-BLACK Microphone Windscreen, 3/8" Inside Diameter (Black)
Since 1976, WindTech has manufactured the highest quality American made microphone windscreens on the market. They are available in  25  brilliant colors, and a wide variety of shapes and sizes to fit most popular microphones. ...

Audix ADX20-IP
Instrument Microphone

OUR PART #  ADX20-IP

Product Information:

The Audix ADX-20i is a pre-polarized condenser microphone designed to handle a wide variety of clip-on applications. The ADX20i is sonically superior as well as aesthetically pleasing and is ideally suited for saxophone, trombone, trumpet and other brass instruments. With a smooth uniform response over a frequency range of40 Hz – 20 kHz, the ADX-20i provides a rich, warm sound not typical of microphones this size. It is machined from solid brass and has a low reflective black e-coat finish. The ADX-20i operates on phantom power (9-52 volts) with the preamp module provided (APS-910). It may be used in battery mode with optional phantom power adapter (APS-911). The ADX-20i can be utilized with a wireless system. Depending on the brand of wireless and the connector configuration of the instrument body pack, the ADX-20i connector would need to be modified accordingly. Low noise electronic circuitry, and balanced low impedanceoutput allow for interference free performance even with long cable runs.

Audix ADX20-IP Features:

  • High tension spring clamp keeps mic in place
  • Multi-position gooseneck
  • Highly accurate sound reproduction
  • Available in hypercardioid version (ADX-20i/hc)

Audix ADX20-IP Specifications:

  • Transducer Type:  Condenser (pre-polarized)
  • Frequency Response:  40 Hz - 20 kHz
  • Polar Pattern:  Cardioid
  • Output Impedance:  250 Ohms balanced
  • Open Circuit Sensitivity:  5.2 mV
  • Equivalent Noise Level:  29 dB (A weighted)
  • Signal to Noise Ratio:  65 dB (ref 1k @ 1 Pascal)
  • Power Requirements:  9 - 52v phantom
  • Maximum SPL:  130 dB
  • Cable/Connector:  Shielded 6’ cable terminating to aminiature 3 pin XLR-f
  • Phantom Adapter:  Mini XLR male - XLR male
  • Polarity:  Positive voltage on pin 2 relative to pin 3 of output XLR connector
  • Housing:  Machined Brass
  • Gooseneck:  Flexible steel
  • Weight:  1.7 oz/4.7 grams (without cable)
Microphone Windscreen, 3/8" Inside Diameter (Black)
WindTech 1500-BLACK Microphone Windscreen, 3/8" Inside Diameter (Black)
Since 1976, WindTech has manufactured the highest quality American made microphone windscreens on the market. They are available in  25  brilliant colors, and a wide variety of shapes and sizes to fit most popular microphones. ...
Microphone Windscreen, 3/8" Inside Diameter (Black)
WindTech 1400-BLACK Microphone Windscreen, 3/8" Inside Diameter (Black)
Since 1976, WindTech has manufactured the highest quality American made microphone windscreens on the market. They are available in  25  brilliant colors, and a wide variety of shapes and sizes to fit most popular microphones. ...
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

HACKER SAFE certified sites prevent over 99.9% of hacker crime.