Electro-Voice ZX4
15" 2 Way Speaker System in Black

OUR PART #  ZX4

Log In for price!

Don't have an account? Apply today!

The Electro-Voice ZX4 is a 15" 2-way speaker system in black.

The rugged enclosure of the Electro-Voice Zx4 is perfect for portable main mix and monitor applications, while the stylish design gives it appeal in even the trendiest of environments. At only 20.2 kg (44.5 lbs), the lightweight Zx4 allows ease of transport and set up.

Every detail of your music is reproduced from extended highs to powerful lows. The DH3 compression driver with its pure titanium diaphragm, coupled with the Zx4’s large 90° x 50° horn allows for tremendous intelligibility and pattern control. The EVS15-SF 15” LF delivers tight, low bass and outstanding power handling capacity.

Zx4 is capable as an entire system. With an integral pole mount the Zx4 is ready for main mix applications in DJ, band and general entertainment use. To accomodate different stage depths, Zx4 incorporates retractable monitor feet. This allows Zx4 to be used as a stage monitor with a 45° or 55° angle.

The high tech enclosure uses injection-molded high impact polypropylene structural foam to make the Zx4 incredibly durable. The enclosure geometry elements have been carefully designed to provide maximum rigidity and bass response.

Electro-Voice ZX4 Specifications:

  • Freq. Response1 (-3 dB): 60 Hz - 20 kHz
  • Freq. Range1 (-10 dB): 42 Hz - 20 kHz
  • Rec. Hipass Frequency: 42 Hz
  • Axial Sensitivity1: 100 dB (1W/1m)
  • Max. Calculated SPL: 132 dB
  • Horizontal Coverage: 90°
  • Vertical Coverage: 50°
  • Power Handling: 400W Continuous, 1600W Peak
  • LF Transducer: EVS15-SF, 15 in (381mm) Driver
  • HF Transducer: DH3, 1 in (25.4mm) exit Compression Driver
  • Crossover Frequency: 1.5 kHz
  • Nominal Impedance: 8 Ohms
  • Minimum Impedance: 6.5 Ohms
  • Connectors: (2) Neutrik Speakon NL4’s
  • Enclosure Material: Polypropylene Structural Foam
  • Suspension: Enclosure has locations for 3 Single-Stud Attachment Plates and 8 Forged Steel Eyebolts - 2 on Top, 2 on Side, and 4 on Rear of Enclosure
  • Grille: Polyester Powder Coated, 16GA Galvanized Steel, with Rotatable Logo
  • Dimensions (H x W x D): 27.26" x 17.57" x16.16"
  • Net Weight: 44.5 lbs
  • Shipping Weight: 52.9 lbs
Wall/Ceiling Mount Kit for ZX5, Black
Electro-Voice MB5-B Wall/Ceiling Mount Kit for ZX5, Black
MB5 Wall/Ceiling Mounting Bracket KitThe MB5 Wall/Ceiling Mounting Bracket Kit features robust brackets and hardware that allow for a Zx5 loudspeaker to bequickly and easily mounted to a wall or ceiling in almost any position to obtain the ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Wall/Ceiling Mount Kit for ZX5, White
Electro-Voice MB5-W Wall/Ceiling Mount Kit for ZX5, White
MB5 Wall/Ceiling Mounting Bracket KitThe MB5 Wall/Ceiling Mounting Bracket Kit features robust brackets and hardware that allow for a Zx5 loudspeaker to bequickly and easily mounted to a wall or ceiling in almost any position to obtain the ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Protective Cover, ZZ4 & ZX5
Electro-Voice HDC-5 Protective Cover, ZZ4 & ZX5
HDC-5 is a heavy duty cover that fits the Zx5 andZx4. Designed to protect the enclosure duringstorage, the HDC-5 has heavy duty padding on allsides. HDC-5 utilizes durable 1000D Black Corduralaminated to foam.The HDC-5 has a built-in hard ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Handle Mounting Kit
Electro-Voice HA-5 Handle Mounting Kit
The HA-5 Handle Mounting Kit features a threaded attach point that allows for a Zx4 or Zx5 loudspeaker to be flownusing a PSA-V Strong-Arm (Sold Separately) to obtain desired orientation and sound coverage.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Single Stud Rigging Kit for ZX3, 3-pk
Electro-Voice SSK-1 Single Stud Rigging Kit for ZX3, 3-pk
Note: Drawings are for illustrative purposes.Single Stud Rigging Kit for the ZX3 series Loudspeaker. Set of 3.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Forged 3/8-16 Eyebolt Kit, 3-pack
Usually ships in 7-14 business days.
Need it sooner? Call us!

Electro-Voice ZX4
15" 2 Way Speaker System in Black

OUR PART #  ZX4

Product Information:

The Electro-Voice ZX4 is a 15" 2-way speaker system in black.

The rugged enclosure of the Electro-Voice Zx4 is perfect for portable main mix and monitor applications, while the stylish design gives it appeal in even the trendiest of environments. At only 20.2 kg (44.5 lbs), the lightweight Zx4 allows ease of transport and set up.

Every detail of your music is reproduced from extended highs to powerful lows. The DH3 compression driver with its pure titanium diaphragm, coupled with the Zx4’s large 90° x 50° horn allows for tremendous intelligibility and pattern control. The EVS15-SF 15” LF delivers tight, low bass and outstanding power handling capacity.

Zx4 is capable as an entire system. With an integral pole mount the Zx4 is ready for main mix applications in DJ, band and general entertainment use. To accomodate different stage depths, Zx4 incorporates retractable monitor feet. This allows Zx4 to be used as a stage monitor with a 45° or 55° angle.

The high tech enclosure uses injection-molded high impact polypropylene structural foam to make the Zx4 incredibly durable. The enclosure geometry elements have been carefully designed to provide maximum rigidity and bass response.

Electro-Voice ZX4 Specifications:

  • Freq. Response1 (-3 dB): 60 Hz - 20 kHz
  • Freq. Range1 (-10 dB): 42 Hz - 20 kHz
  • Rec. Hipass Frequency: 42 Hz
  • Axial Sensitivity1: 100 dB (1W/1m)
  • Max. Calculated SPL: 132 dB
  • Horizontal Coverage: 90°
  • Vertical Coverage: 50°
  • Power Handling: 400W Continuous, 1600W Peak
  • LF Transducer: EVS15-SF, 15 in (381mm) Driver
  • HF Transducer: DH3, 1 in (25.4mm) exit Compression Driver
  • Crossover Frequency: 1.5 kHz
  • Nominal Impedance: 8 Ohms
  • Minimum Impedance: 6.5 Ohms
  • Connectors: (2) Neutrik Speakon NL4’s
  • Enclosure Material: Polypropylene Structural Foam
  • Suspension: Enclosure has locations for 3 Single-Stud Attachment Plates and 8 Forged Steel Eyebolts - 2 on Top, 2 on Side, and 4 on Rear of Enclosure
  • Grille: Polyester Powder Coated, 16GA Galvanized Steel, with Rotatable Logo
  • Dimensions (H x W x D): 27.26" x 17.57" x16.16"
  • Net Weight: 44.5 lbs
  • Shipping Weight: 52.9 lbs
Wall/Ceiling Mount Kit for ZX5, Black
Electro-Voice MB5-B Wall/Ceiling Mount Kit for ZX5, Black
MB5 Wall/Ceiling Mounting Bracket KitThe MB5 Wall/Ceiling Mounting Bracket Kit features robust brackets and hardware that allow for a Zx5 loudspeaker to bequickly and easily mounted to a wall or ceiling in almost any position to obtain the ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Wall/Ceiling Mount Kit for ZX5, White
Electro-Voice MB5-W Wall/Ceiling Mount Kit for ZX5, White
MB5 Wall/Ceiling Mounting Bracket KitThe MB5 Wall/Ceiling Mounting Bracket Kit features robust brackets and hardware that allow for a Zx5 loudspeaker to bequickly and easily mounted to a wall or ceiling in almost any position to obtain the ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Protective Cover, ZZ4 & ZX5
Electro-Voice HDC-5 Protective Cover, ZZ4 & ZX5
HDC-5 is a heavy duty cover that fits the Zx5 andZx4. Designed to protect the enclosure duringstorage, the HDC-5 has heavy duty padding on allsides. HDC-5 utilizes durable 1000D Black Corduralaminated to foam.The HDC-5 has a built-in hard ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Handle Mounting Kit
Electro-Voice HA-5 Handle Mounting Kit
The HA-5 Handle Mounting Kit features a threaded attach point that allows for a Zx4 or Zx5 loudspeaker to be flownusing a PSA-V Strong-Arm (Sold Separately) to obtain desired orientation and sound coverage.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Single Stud Rigging Kit for ZX3, 3-pk
Electro-Voice SSK-1 Single Stud Rigging Kit for ZX3, 3-pk
Note: Drawings are for illustrative purposes.Single Stud Rigging Kit for the ZX3 series Loudspeaker. Set of 3.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Forged 3/8-16 Eyebolt Kit, 3-pack
Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

HACKER SAFE certified sites prevent over 99.9% of hacker crime.