Audio-Technica PRO70
Cardioid Condenser Lavalier/Instrument Microphone

OUR PART #  PRO70


The Audio-Technica PRO70 miniature condenser microphone achieves full-sounding pickup and is known for outstanding consistency and dependable performance. Supplied with both a clothing clip and guitar mount, it provides natural and articulate vocal reproduction when used as a clip-on lavalier and excels in pickup of acoustic guitar. The PRO 70 is designed to make music and speech clearly and comfortably audible, yet never draw attention to itself or its operation. The microphone is equipped with a low-frequency roll-off switch that allows for reduced pickup of room noise. The versatile PRO 70 may be powered by either battery or phantom power. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.

Audio-Technica PRO70 Includes:

  •  AT8411 clothing clip
  • AT8444 instrument adapter
  • Power Module
  • Windscreen
  • Battery
  • Soft Protective Pouch

Audio-Technica PRO70 Features:

  • Miniature condenser microphone is ideal for both vocal and acoustic guitar applications
  • Natural and articulate vocal reproduction when used as a clip-on lavalier—clothing clip included
  • Excels in pickup of acoustic guitar with included instrument adapter
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Switchable low-frequency roll-off
  • Corrosion-resistant contacts from gold-plated XLRM-type connector
  • Operates on battery or phantom power
  • 6' (1.8 m) cable permanently attached between microphone and power module

Audio-Technica PRO70 Specifications:

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 100 Hz -14 kHz
  • Low Frequency Roll-Off: 80 Hz, 8 dB/octave
  • Open Circuit Sensitivity: Phantom: -45 dB (5.6 mV) re 1V at 1 Pa; Battery:-45 dB (5.6 mV) re 1V at 1 Pa
  • Impedance:
    • Phantom: 200 ohms
    • Battery: 200 ohms
  • Maximum Input Sound Level: Phantom: 123 dB SPL, 1 kHz at 1% T.H.D.; Battery: 123 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range (typical): Phantom - 96 dB, 1 kHz at Max SPL; Battery: 96 dB,1 kHz at Max SPL
  • Signal-to-Noise Ratio: 67 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 11 - 52V DC, 2 mA typical
  • Battery Type: 11 - 52V DC, 2 mA typical
  • Battery Current/Life: 0.4 mA/1200 hours typical (alkaline)
  • Switch: Off, On - Flat, On - Roll-Off
  • Weight (microphone): 0.3 oz
  • Weight (power module): 4.7 oz
  • Dimensions (microphone): 0.98" long, 0.40" diameter
  • Dimensions (power module, H x W x D): 3.27" x 2.48" x 0.87"
  • Output Connector: Integral 3-pin XLRM-type
  • Cable: Integral 6ft, permanently attachedbetween microphone and power module
Mic Clip for AT803A
Audio-Technica AT8417 Mic Clip for AT803A
The AT8417 lavalier clothing clip features an adjustable wire fitting allowing use with virtually any size lavalier microphone.
Lavalier Tie Clip
Audio-Technica AT8411 Lavalier Tie Clip
 The AT8411 lavalier tie / clothing clip is designed to fit the Audio Technica Pro 7a, Pro 35x, AT-803B, AT-831R / 831B / 831C and Pro 95 lavalier microphones.

3.0 / 5

★★★★★ Log In for price!

In Stock
Small Black Windscreen for M1 Case Style
Audio-Technica AT8116 Small Black Windscreen for M1 Case Style
The Audio-Technica AT8116 is a small black foam windscreen that's designed for use with AT803, AT831 microphones (sold separately), and fits Audio-Technica Case Style: M1 (sold separatetly ).
Replacement instrument mount and windscreen

Usually ships in 7-14 business days.
Need it sooner? Call us!
Mount for Pro 7A
Audio-Technica AT8444 Mount for Pro 7A
Mounts small-diameter (10 mm) microphone to acoustic guitar. Fits Audio-Technica Case Style(s): M1

Usually ships in 7-14 business days.
Need it sooner? Call us!

Audio-Technica PRO70
Cardioid Condenser Lavalier/Instrument Microphone

OUR PART #  PRO70

Product Information:

The Audio-Technica PRO70 miniature condenser microphone achieves full-sounding pickup and is known for outstanding consistency and dependable performance. Supplied with both a clothing clip and guitar mount, it provides natural and articulate vocal reproduction when used as a clip-on lavalier and excels in pickup of acoustic guitar. The PRO 70 is designed to make music and speech clearly and comfortably audible, yet never draw attention to itself or its operation. The microphone is equipped with a low-frequency roll-off switch that allows for reduced pickup of room noise. The versatile PRO 70 may be powered by either battery or phantom power. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.

Audio-Technica PRO70 Includes:

  •  AT8411 clothing clip
  • AT8444 instrument adapter
  • Power Module
  • Windscreen
  • Battery
  • Soft Protective Pouch

Audio-Technica PRO70 Features:

  • Miniature condenser microphone is ideal for both vocal and acoustic guitar applications
  • Natural and articulate vocal reproduction when used as a clip-on lavalier—clothing clip included
  • Excels in pickup of acoustic guitar with included instrument adapter
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Switchable low-frequency roll-off
  • Corrosion-resistant contacts from gold-plated XLRM-type connector
  • Operates on battery or phantom power
  • 6' (1.8 m) cable permanently attached between microphone and power module

Audio-Technica PRO70 Specifications:

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 100 Hz -14 kHz
  • Low Frequency Roll-Off: 80 Hz, 8 dB/octave
  • Open Circuit Sensitivity: Phantom: -45 dB (5.6 mV) re 1V at 1 Pa; Battery:-45 dB (5.6 mV) re 1V at 1 Pa
  • Impedance:
    • Phantom: 200 ohms
    • Battery: 200 ohms
  • Maximum Input Sound Level: Phantom: 123 dB SPL, 1 kHz at 1% T.H.D.; Battery: 123 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range (typical): Phantom - 96 dB, 1 kHz at Max SPL; Battery: 96 dB,1 kHz at Max SPL
  • Signal-to-Noise Ratio: 67 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 11 - 52V DC, 2 mA typical
  • Battery Type: 11 - 52V DC, 2 mA typical
  • Battery Current/Life: 0.4 mA/1200 hours typical (alkaline)
  • Switch: Off, On - Flat, On - Roll-Off
  • Weight (microphone): 0.3 oz
  • Weight (power module): 4.7 oz
  • Dimensions (microphone): 0.98" long, 0.40" diameter
  • Dimensions (power module, H x W x D): 3.27" x 2.48" x 0.87"
  • Output Connector: Integral 3-pin XLRM-type
  • Cable: Integral 6ft, permanently attachedbetween microphone and power module
Mic Clip for AT803A
Audio-Technica AT8417 Mic Clip for AT803A
The AT8417 lavalier clothing clip features an adjustable wire fitting allowing use with virtually any size lavalier microphone.
Lavalier Tie Clip
Audio-Technica AT8411 Lavalier Tie Clip
 The AT8411 lavalier tie / clothing clip is designed to fit the Audio Technica Pro 7a, Pro 35x, AT-803B, AT-831R / 831B / 831C and Pro 95 lavalier microphones.

3.0 / 5

★★★★★ Log In for price!

In Stock
Small Black Windscreen for M1 Case Style
Audio-Technica AT8116 Small Black Windscreen for M1 Case Style
The Audio-Technica AT8116 is a small black foam windscreen that's designed for use with AT803, AT831 microphones (sold separately), and fits Audio-Technica Case Style: M1 (sold separatetly ).
Replacement instrument mount and windscreen

Usually ships in 7-14 business days.
Need it sooner? Call us!
Mount for Pro 7A
Audio-Technica AT8444 Mount for Pro 7A
Mounts small-diameter (10 mm) microphone to acoustic guitar. Fits Audio-Technica Case Style(s): M1

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM