Belden 1800B-500-GRAY
Wire, AES/EBU, 24AWG, 1pr, 500'

OUR PART #  1800B-500-GRAY

Log In for price!

Don't have an account? Apply today!

While digital audio has been around for over 25 years, only recently has there been an effort to standardize specifications. The Audio
Engineering Society (U.S.) and the European Broadcast Union have established an international standard, called AES/EBU. The detailed
specifications of this standard are:
Sampling Rate: from 32 KHz to 192 KHz
Bandwidth: from 4.096 MHz to 24.5 MHz
Impedance: 110O ± 20%

The key difference between twisted pair specifications for digital audio cable and standard analog audio cable is the impedance specification.
AES/EBU, with its broad tolerance, allows cables with impedances from 88 ohms to 132 ohms to be used. Standard analog audio cable impedance is 45 ohms to 70 ohms. This potential amount of mismatch can result in signal reflections and jitter, causing bit errors at the receiver. For this reason Belden recommends 100 to 120 ohm shielded twisted pair cable.

Belden’s product offering includes 110 ohm cable solutions and an entire line of single and multi-pair snake cable designed specifically
for digital audio. These cables utilize Datalene® premium grade high density insulation. This provides exceptional crush resistance as compared to standard foam polyethylenes, making the new cables less susceptible to damage resulting from cable pulling or flexing. The high velocity of propagation further reduces capacitance and signal delay providing error-free transmissions over extended distances.

Features:

  • 24 AWG stranded (7x32) tinned copper conductors
  • Datalene® insulation
  • Twisted pairs
  • Overall Beldfoil® shield (100% coverage)
  • 24 AWG drain wire
  • PVC jacket.'

Specifications:

  • Conductor:
      -  # of Pairs: 1
      -  AWG: 24
      -  Stranding: 7 x 32
      -  Conductor Material: TC - Tinned Copper
      -  Dia. (in.): .024
  • Insulation:
      -  Insulation Trade Name: Datalene
      -  Insulation Material: FHDPE: Foam High Density Polyethylene
      -  Dia (in.): .068
  • Outer Shield:
      -  Outer Shield Trade Name: Beldfoil
      -  Type: Tape
      -  Outer Shield Material: Aluminum Foil-Polyester Tape
      -  Coverage: 100%
  • Outer Shield Drain Wire:
      -  AWG: 24
      -  Stranding: 7 x 32
      -  Drain Wire Conductor Material: TC - Tinned Copper
  • Outer Jacket:
      -  Outer Jacket Material: PVC - Polyvinyl Chloride

Belden 1800B-500-GRAY
Wire, AES/EBU, 24AWG, 1pr, 500'

OUR PART #  1800B-500-GRAY

Product Information:

While digital audio has been around for over 25 years, only recently has there been an effort to standardize specifications. The Audio
Engineering Society (U.S.) and the European Broadcast Union have established an international standard, called AES/EBU. The detailed
specifications of this standard are:
Sampling Rate: from 32 KHz to 192 KHz
Bandwidth: from 4.096 MHz to 24.5 MHz
Impedance: 110O ± 20%

The key difference between twisted pair specifications for digital audio cable and standard analog audio cable is the impedance specification.
AES/EBU, with its broad tolerance, allows cables with impedances from 88 ohms to 132 ohms to be used. Standard analog audio cable impedance is 45 ohms to 70 ohms. This potential amount of mismatch can result in signal reflections and jitter, causing bit errors at the receiver. For this reason Belden recommends 100 to 120 ohm shielded twisted pair cable.

Belden’s product offering includes 110 ohm cable solutions and an entire line of single and multi-pair snake cable designed specifically
for digital audio. These cables utilize Datalene® premium grade high density insulation. This provides exceptional crush resistance as compared to standard foam polyethylenes, making the new cables less susceptible to damage resulting from cable pulling or flexing. The high velocity of propagation further reduces capacitance and signal delay providing error-free transmissions over extended distances.

Features:

  • 24 AWG stranded (7x32) tinned copper conductors
  • Datalene® insulation
  • Twisted pairs
  • Overall Beldfoil® shield (100% coverage)
  • 24 AWG drain wire
  • PVC jacket.'

Specifications:

  • Conductor:
      -  # of Pairs: 1
      -  AWG: 24
      -  Stranding: 7 x 32
      -  Conductor Material: TC - Tinned Copper
      -  Dia. (in.): .024
  • Insulation:
      -  Insulation Trade Name: Datalene
      -  Insulation Material: FHDPE: Foam High Density Polyethylene
      -  Dia (in.): .068
  • Outer Shield:
      -  Outer Shield Trade Name: Beldfoil
      -  Type: Tape
      -  Outer Shield Material: Aluminum Foil-Polyester Tape
      -  Coverage: 100%
  • Outer Shield Drain Wire:
      -  AWG: 24
      -  Stranding: 7 x 32
      -  Drain Wire Conductor Material: TC - Tinned Copper
  • Outer Jacket:
      -  Outer Jacket Material: PVC - Polyvinyl Chloride
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM