Electro-Voice EVID C8.2LP
Pair of 8" Coaxial Speakers, Shallow Mounting Depth

OUR PART #  C8.2LP


The Electro-Voice ® EVID C8.2LP loudspeaker system is a complete two-way ceiling loudspeaker in a low profile package. The package consists of a bezel assembly, grille, rear enclosure, 8-inch coax two-way loudspeaker and internal line-matching transformer. The loudspeaker features a waveguide coupled titanium coated dome tweeter.

The EVID C8.2LP loudspeaker utilizes a 2nd order crossover network at 2.5 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels. The C8.2LP utilizes a transformer that offers a selection of 1.88 (70-V only), 3.75, 7.5, 15 or 30 watts delivered to the loudspeaker system using either 70-V or 100-V lines, or 8 ohm bypass. Selection is via a convenient switch on the front baffle. The perforated grille is finished in semi-gloss white powder-coated enamel. The baffle and bezel are constructed from UL 94V-0 rated ABS. The rear enclosure is constructed from zinc-plated, heavy gauge steel.

The low profile enclosure makes it easy to mount in tight spaces. A rear cover, with provisions for a junction box fitting, provides access to a 4-pin terminal block that allows direct connection to the speaker with 12 gauge wire and provides pass through to additional speakers. A tile bridge is included for safe suspension of the C8.2LP ceiling systems in a drop ceiling that uses mineral wool, or other fiber-based ceiling tiles. The EVID line of ceiling speakers has been designed to work together as a complete system in a wide range of different ceiling contructions. They provide wide dispersion, high-efficiency, high-maximum output, ease of installation, and wide-range reproduction of music or voice.

Electro-Voice EVID C8.2LP Features:

  • Low Profile 8" coaxial two-way
  • Waveguide coupled Ti Tweeter
  • Full bandwidth overload protection
  • Front baffle wattage tap adjustment
  • Integrated low loss matching transformer allows for either 70v/100v or 8-ohm operation
  • Includes tile bridge and mounting ring for easy installation
  • Integrated ported enclosure for extended bass response
  • Ideal for ceiling spaces with tight clearance

    Electro-Voice EVID C8.2LP Specifications:

    • Freq. Response (-10dB): 50Hz-20kHz
    • Coverage (Conical): 110°
    • Power Handling: 100W Cont. / 400W Peak
    • Sensitivity (SPL 1w/1m): 91 dB
    • Max Calculated SPL: 117 dB
    • Impedance: 8 Ohms nominal (transformer bypass)
    • Network: Network and transducers protected, 12 dB/oct2.6kHz
    • LF Transducer: 8 in. (200mm) Polypropylene cone
    • HF Transducer: 1 in. (25mm) Ti Mylar laminate
    • Transformer Taps:
      • 70V: 1.88, 3.75, 7.5, 15 or 30W
      • 100V: 3.75, 7.5, 15 or 30W
      • Bypass: 8 Ohms
    • Connectors: Phoenix type removable w/ screw terminals& "loop-thru", 12-gauge wire
    • Enclosure Material:
      • Baffle-UL 94V-O rated ABS
      • Backcan-Zinc plated steel
    • Grille: Perforated powder coated steel with safetytether
    • Support Hardware: Tile bridge, backing plate support,cutout template, paint shield
    • Dimensions: 7.0" Height x 10.6" Diameter (255 x 270mm)
    • Cutout Size: 10.8" (274mm)
    • Net Weight (each): 11.0 lbs. (5.0 kg)
    • Shipping Weight (pair): 24.0 lbs. (11.0 kg)
    Pair of 10" 70/100V Ceiling Subwoofers
    Electro-Voice EVID C10.1 Pair of 10" 70/100V Ceiling Subwoofers
    The Electro-Voice EVID C10.1 packs a large 10" subwoofer in a tuned high performance enclosure to give amazing low frequency performance down to 45Hz. The EVID C10.1 is one of the only quick mount ceiling subwoofers available on the ...

    Usually ships in 7-14 business days.
    Need it sooner? Call us!
    Mount Plate f/C8.2/C8.2LP 4pk
    Electro-Voice RR82 Mount Plate f/C8.2/C8.2LP 4pk
    Rough in plates for EVID Ceiling SpeakersKits for rough-in pre-install when using sheetrock or plaster ceiling construction.RR-42: Rough-in mounting plate for use with the EVID C4.2 (package of 4)RR-82: Rough-in mounting plate for use with ...

    Usually ships in 7-14 business days.
    Need it sooner? Call us!

    Click to download

    Electro-Voice EVID C8.2LP
    Pair of 8" Coaxial Speakers, Shallow Mounting Depth

    OUR PART #  C8.2LP

    Product Information:

    The Electro-Voice ® EVID C8.2LP loudspeaker system is a complete two-way ceiling loudspeaker in a low profile package. The package consists of a bezel assembly, grille, rear enclosure, 8-inch coax two-way loudspeaker and internal line-matching transformer. The loudspeaker features a waveguide coupled titanium coated dome tweeter.

    The EVID C8.2LP loudspeaker utilizes a 2nd order crossover network at 2.5 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels. The C8.2LP utilizes a transformer that offers a selection of 1.88 (70-V only), 3.75, 7.5, 15 or 30 watts delivered to the loudspeaker system using either 70-V or 100-V lines, or 8 ohm bypass. Selection is via a convenient switch on the front baffle. The perforated grille is finished in semi-gloss white powder-coated enamel. The baffle and bezel are constructed from UL 94V-0 rated ABS. The rear enclosure is constructed from zinc-plated, heavy gauge steel.

    The low profile enclosure makes it easy to mount in tight spaces. A rear cover, with provisions for a junction box fitting, provides access to a 4-pin terminal block that allows direct connection to the speaker with 12 gauge wire and provides pass through to additional speakers. A tile bridge is included for safe suspension of the C8.2LP ceiling systems in a drop ceiling that uses mineral wool, or other fiber-based ceiling tiles. The EVID line of ceiling speakers has been designed to work together as a complete system in a wide range of different ceiling contructions. They provide wide dispersion, high-efficiency, high-maximum output, ease of installation, and wide-range reproduction of music or voice.

    Electro-Voice EVID C8.2LP Features:

    • Low Profile 8" coaxial two-way
    • Waveguide coupled Ti Tweeter
    • Full bandwidth overload protection
    • Front baffle wattage tap adjustment
    • Integrated low loss matching transformer allows for either 70v/100v or 8-ohm operation
    • Includes tile bridge and mounting ring for easy installation
    • Integrated ported enclosure for extended bass response
    • Ideal for ceiling spaces with tight clearance

      Electro-Voice EVID C8.2LP Specifications:

      • Freq. Response (-10dB): 50Hz-20kHz
      • Coverage (Conical): 110°
      • Power Handling: 100W Cont. / 400W Peak
      • Sensitivity (SPL 1w/1m): 91 dB
      • Max Calculated SPL: 117 dB
      • Impedance: 8 Ohms nominal (transformer bypass)
      • Network: Network and transducers protected, 12 dB/oct2.6kHz
      • LF Transducer: 8 in. (200mm) Polypropylene cone
      • HF Transducer: 1 in. (25mm) Ti Mylar laminate
      • Transformer Taps:
        • 70V: 1.88, 3.75, 7.5, 15 or 30W
        • 100V: 3.75, 7.5, 15 or 30W
        • Bypass: 8 Ohms
      • Connectors: Phoenix type removable w/ screw terminals& "loop-thru", 12-gauge wire
      • Enclosure Material:
        • Baffle-UL 94V-O rated ABS
        • Backcan-Zinc plated steel
      • Grille: Perforated powder coated steel with safetytether
      • Support Hardware: Tile bridge, backing plate support,cutout template, paint shield
      • Dimensions: 7.0" Height x 10.6" Diameter (255 x 270mm)
      • Cutout Size: 10.8" (274mm)
      • Net Weight (each): 11.0 lbs. (5.0 kg)
      • Shipping Weight (pair): 24.0 lbs. (11.0 kg)
      Pair of 10" 70/100V Ceiling Subwoofers
      Electro-Voice EVID C10.1 Pair of 10" 70/100V Ceiling Subwoofers
      The Electro-Voice EVID C10.1 packs a large 10" subwoofer in a tuned high performance enclosure to give amazing low frequency performance down to 45Hz. The EVID C10.1 is one of the only quick mount ceiling subwoofers available on the ...

      Usually ships in 7-14 business days.
      Need it sooner? Call us!
      Mount Plate f/C8.2/C8.2LP 4pk
      Electro-Voice RR82 Mount Plate f/C8.2/C8.2LP 4pk
      Rough in plates for EVID Ceiling SpeakersKits for rough-in pre-install when using sheetrock or plaster ceiling construction.RR-42: Rough-in mounting plate for use with the EVID C4.2 (package of 4)RR-82: Rough-in mounting plate for use with ...

      Usually ships in 7-14 business days.
      Need it sooner? Call us!

      Click to download

      Add to Cart

      We're sorry, only of this item available



      Call a Sales Pro at for more information

      Serving Contractors, Dealers, and Installers Since 1977

      Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM