Neutrik NL4FX
4-Pole Speakon Cable Connector

OUR PART #  NL4FX

Log In for price!

Don't have an account? Apply today!

Neutrik's NL4FX is a 4-pole cable connector with chuck and dark grey bushing.

A new generation of loudspeaker amplifier system: SPX Series. This second generation of Speakon® connectors features a higher current rating for the operation of high power speakers and amplifiers carrying more than 1000 Watts. Change easily and quickly from a straight connector to the right-angle version, without disconnecting the cable. Only 3 parts.

Electrical Specifications:

  • Rated current/contact: 40 A rms continous, 50 A audiosignal, duty cycle 50%
  • Dielectric strength: 4kV peak
  • Rated voltage: 250 V ac
  • Contact resistance after lifetime: < 2 m ohm
  • Insulation resistance: > 1 G ohm
  • Inrush/Outrush current capability (12v source): 300/30A/200 ms
  • Creepage distance is according to IEC 60664-1

Mechanical Specifications:

  • Retention method: Quick lock with latch
  • Lifetime (mating cycles): > 5000
  • Cable anchoring: NEUTRIK® chuck principle
  • Cable O.D. range: 7.5 - 14 mm / 0.3 - 0.55"
  • Cable retention force of >220N is subject to cable OD and material
  • Wiring: screw-type terminals (stranded wire 5mm2/10 AWG) or soldering (stranded wire 6mm2)
  • Solderability: complies with IEC 68-2-20

Material Specifications:

  • Contacts: Brass CuZn39Pb3
  • Locking element: Zinc diecast ZnAI4Cu1
  • Housing / insert: PBTP 20% GR
  • Bushing: Polyamide PA 6 15% GR
  • Chuck: Polyacetal POM
  • Temperature range: -30°C to +80°C
  • Flammability: UL94V-0 (housing), UL94HB

Amplifier Wiring:

  • Stereo ("HIFI"): one NL4MP socket left channel pins 1+/1- right channel pins 2+/2-
  • Power ("PA) Standard: three NL4MP sockets "A" socket: left channel pins 1+/1- "B" socket: right channel pins 1+/1-
  • Bridged mono: "M" socket: left channel pins 1+/1- right channel pins 2+/2-
  • BI-Amp: one NL4MP socket low frequency pins 1+/1- high frequency pins2+/2-

Cable Wiring:

  • Stereo ("HIFI"): NL4FC/NL4FX/NL4FRX on amplifier end, four conductor cable splits into two pairs with NL4FC/NL4FX/NL4FRX on each end
  • Power ("PA) Standard: a two-conductor cable for each channel with NL4FC/NL4FX/NL4FRX on both ends
  • Bridged mono: a special two-conductor cable, on both ends wired to pin 1+/2+ of NL4FC/NL4FX/NL4FRX
  • BI-Amp: a four-conductor cable on both ends wired to pins 1+/1-, 2+/2- ofNL4FC/NL4FX/NL4FRX

Speaker Wiring:

  • Stereo ("HIFI"): one NL4MP per speaker left speaker pins 1+/1- right speaker pins 2+/2-
  • Power ("PA) Standard: NL4MP pin 1+ to speaker coil "+" NL4MP pins 1- and 2+ to speaker coil "-"
  • Bridged mono: NL4MP pin 1+ to speaker coil "+" NL4MP pins 1- and 2+ to speaker coil "-"
  • BI-Amp: one NL4MP socket low frequency pins 1+/1- high frequency pins2+/2-

Neutrik NL4FX
4-Pole Speakon Cable Connector

OUR PART #  NL4FX

Product Information:

Neutrik's NL4FX is a 4-pole cable connector with chuck and dark grey bushing.

A new generation of loudspeaker amplifier system: SPX Series. This second generation of Speakon® connectors features a higher current rating for the operation of high power speakers and amplifiers carrying more than 1000 Watts. Change easily and quickly from a straight connector to the right-angle version, without disconnecting the cable. Only 3 parts.

Electrical Specifications:

  • Rated current/contact: 40 A rms continous, 50 A audiosignal, duty cycle 50%
  • Dielectric strength: 4kV peak
  • Rated voltage: 250 V ac
  • Contact resistance after lifetime: < 2 m ohm
  • Insulation resistance: > 1 G ohm
  • Inrush/Outrush current capability (12v source): 300/30A/200 ms
  • Creepage distance is according to IEC 60664-1

Mechanical Specifications:

  • Retention method: Quick lock with latch
  • Lifetime (mating cycles): > 5000
  • Cable anchoring: NEUTRIK® chuck principle
  • Cable O.D. range: 7.5 - 14 mm / 0.3 - 0.55"
  • Cable retention force of >220N is subject to cable OD and material
  • Wiring: screw-type terminals (stranded wire 5mm2/10 AWG) or soldering (stranded wire 6mm2)
  • Solderability: complies with IEC 68-2-20

Material Specifications:

  • Contacts: Brass CuZn39Pb3
  • Locking element: Zinc diecast ZnAI4Cu1
  • Housing / insert: PBTP 20% GR
  • Bushing: Polyamide PA 6 15% GR
  • Chuck: Polyacetal POM
  • Temperature range: -30°C to +80°C
  • Flammability: UL94V-0 (housing), UL94HB

Amplifier Wiring:

  • Stereo ("HIFI"): one NL4MP socket left channel pins 1+/1- right channel pins 2+/2-
  • Power ("PA) Standard: three NL4MP sockets "A" socket: left channel pins 1+/1- "B" socket: right channel pins 1+/1-
  • Bridged mono: "M" socket: left channel pins 1+/1- right channel pins 2+/2-
  • BI-Amp: one NL4MP socket low frequency pins 1+/1- high frequency pins2+/2-

Cable Wiring:

  • Stereo ("HIFI"): NL4FC/NL4FX/NL4FRX on amplifier end, four conductor cable splits into two pairs with NL4FC/NL4FX/NL4FRX on each end
  • Power ("PA) Standard: a two-conductor cable for each channel with NL4FC/NL4FX/NL4FRX on both ends
  • Bridged mono: a special two-conductor cable, on both ends wired to pin 1+/2+ of NL4FC/NL4FX/NL4FRX
  • BI-Amp: a four-conductor cable on both ends wired to pins 1+/1-, 2+/2- ofNL4FC/NL4FX/NL4FRX

Speaker Wiring:

  • Stereo ("HIFI"): one NL4MP per speaker left speaker pins 1+/1- right speaker pins 2+/2-
  • Power ("PA) Standard: NL4MP pin 1+ to speaker coil "+" NL4MP pins 1- and 2+ to speaker coil "-"
  • Bridged mono: NL4MP pin 1+ to speaker coil "+" NL4MP pins 1- and 2+ to speaker coil "-"
  • BI-Amp: one NL4MP socket low frequency pins 1+/1- high frequency pins2+/2-
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

HACKER SAFE certified sites prevent over 99.9% of hacker crime.