DBX DriveRack 260
Loudspeaker Management Signal Processor

OUR PART #  DRIVERACK-260


The dbx DriveRack 260 provides full bandpass and crossover configurations as well as independent output processing and a full time RTA for live sound applications. Contractors will appreciate its control inputs for wall-panel logic control and advanced feedback suppression (AFS™).

The DriveRack 260 features 2-independent channels of processing with a linkable 28-Band Graphic Equalizer, stereo compressor module, feedback eliminator and the 120A subharmonic synthesizer on the input, with a 6-channel output system that includes parametric EQs, PeakStopPlus® limiters (to provide protection against speaker blowouts) and alignment delay. I/O-2-XLR inputs/6-XLR outputs & XLR RTA mic input.

dbx DriveRack 260 Features:

  • Feedback Elimination
  • 2.7 Seconds of Alignment and Zone Delay
  • RS-232 PC GUI control
  • Classic dbx Compression and Limiting
  • Graphic and Parametric EQ
  • Auto-EQ Function
  • Full Bandpass, Crossover, and Routing Configurations
  • Auto Gain Control
  • Pink Noise Generator and fulltime RTA
  • Setup Wizard with JBL speaker and Crown Power Amplifier Tunings
  • Security Lockout
  • Wall Panel Control Inputs
    dbx DriverRack 260 Specifications:
    • Analog Inputs:
      • Number of Inputs:  (2) Line inputs. (1) RTA Mic input
      • Connectors:  (2) Female XLR line inputs. XLR RTA Mic input
      • Type:  Electronically balanced/RF filtered
      • Impedance:  > 40 kOhms
      • Max Input line level:  +34dBu with input jumpers in +30 position
      • CMRR:  > 45 dB
      • RTA Mic Phantom Voltage:  +15 VDC
      • RTA Mic EIN:  <-110 dBu, 22 Hz - 22 kHz, 150 ohm
    • Analog Outputs:
      • Number of Outputs:  6
      • Connectors:  Male XLR
      • Type:  Electronically balanced, RF filter
      • Impedance:  120 Ohms
      • Max Output Level:  +22dBu
    • A/D Performance:
      • Type:  dbx Type IV® conversion system
      • Dynamic Range Line:
        • > 114 dB A-weighted
        • > 112 dB unweighted
      • Type IV® Dynamic Range:
        • > 119 dB, A-weighted, 22 kHz BW
        • > 117 dB, A-weighted, 22 kHz BW
      • Sample Rate:  48 kHz
    • D/A Performance:
      • Dynamic Range:  112 dB A-unweighted, 110 dB unweighted
    • System Performance:
      • Dynamic Range:  110 dB unweighted, >107 dB weighted
      • THD + N:  0.002% typical at +4 dBu, 1 kHz, 0 dB input gain
      • Frequency Response:  20 Hz - 20 kHz, +/-0.5 dB
      • Interchannel Crosstalk:  > 110 dB, 120 dB typical
      • Crosstalk Input to Output:  > 100 dB
    Real-Time Analyzer Microphone for dbx DriveRack
    DBX RTA-M Real-Time Analyzer Microphone for dbx DriveRack
    The dbx RTA-M real time audio analyzing mic is the perfect accessory tool for the DriveRack PA series (PA, PX, PA+, PA2) and 260. Used in conjunction with the System Setup Wizard and Auto EQ Wizard the RTA-M is ideal for optimizing the ...
    Zone Controller for DriveRack 220i and 260
    DBX ZC-3 Zone Controller for DriveRack 220i and 260
    This remote device provides programmable rotary switch program selection for the dbx DriveRack 220i and 260 devices. It also provides rotary switch programmable source selection, page assignment, or scene selection for the dbx ZonePro ...
    Zone Controller for Driverack
    DBX ZC-2 Zone Controller for Driverack
    The ZC-2 remote device provides computer programmable rotary potentiometer and push-button volume control and muting for the dbx DriveRack 260, 220i and ZonePro devices. The remote device has DIP switches allowing identification with ...
    Zone Controller for Driverack
    DBX ZC-1 Zone Controller for Driverack
    The ZC-1 provides programmable remote volume control for the DriveRack 220i, 260 and ZonePRO devices.The Zone Controllers offer extended utility to the DriveRack® and ZonePRO™ families. The nine Zone Controllers use analog DC voltage to ...
    Zone Controller for Driverack
    DBX ZC-4 Zone Controller for Driverack
    This remote device provides programmable program selection via contact closures for the dbx DriveRack 220i and 260 devices. It also provides contact closure programmable source selection, page assignment, or scene selection for the dbx ...

    Usually ships in 7-14 business days.
    Need it sooner? Call us!

    Click to download

    DBX DriveRack 260
    Loudspeaker Management Signal Processor

    OUR PART #  DRIVERACK-260

    Product Information:

    The dbx DriveRack 260 provides full bandpass and crossover configurations as well as independent output processing and a full time RTA for live sound applications. Contractors will appreciate its control inputs for wall-panel logic control and advanced feedback suppression (AFS™).

    The DriveRack 260 features 2-independent channels of processing with a linkable 28-Band Graphic Equalizer, stereo compressor module, feedback eliminator and the 120A subharmonic synthesizer on the input, with a 6-channel output system that includes parametric EQs, PeakStopPlus® limiters (to provide protection against speaker blowouts) and alignment delay. I/O-2-XLR inputs/6-XLR outputs & XLR RTA mic input.

    dbx DriveRack 260 Features:

    • Feedback Elimination
    • 2.7 Seconds of Alignment and Zone Delay
    • RS-232 PC GUI control
    • Classic dbx Compression and Limiting
    • Graphic and Parametric EQ
    • Auto-EQ Function
    • Full Bandpass, Crossover, and Routing Configurations
    • Auto Gain Control
    • Pink Noise Generator and fulltime RTA
    • Setup Wizard with JBL speaker and Crown Power Amplifier Tunings
    • Security Lockout
    • Wall Panel Control Inputs
      dbx DriverRack 260 Specifications:
      • Analog Inputs:
        • Number of Inputs:  (2) Line inputs. (1) RTA Mic input
        • Connectors:  (2) Female XLR line inputs. XLR RTA Mic input
        • Type:  Electronically balanced/RF filtered
        • Impedance:  > 40 kOhms
        • Max Input line level:  +34dBu with input jumpers in +30 position
        • CMRR:  > 45 dB
        • RTA Mic Phantom Voltage:  +15 VDC
        • RTA Mic EIN:  <-110 dBu, 22 Hz - 22 kHz, 150 ohm
      • Analog Outputs:
        • Number of Outputs:  6
        • Connectors:  Male XLR
        • Type:  Electronically balanced, RF filter
        • Impedance:  120 Ohms
        • Max Output Level:  +22dBu
      • A/D Performance:
        • Type:  dbx Type IV® conversion system
        • Dynamic Range Line:
          • > 114 dB A-weighted
          • > 112 dB unweighted
        • Type IV® Dynamic Range:
          • > 119 dB, A-weighted, 22 kHz BW
          • > 117 dB, A-weighted, 22 kHz BW
        • Sample Rate:  48 kHz
      • D/A Performance:
        • Dynamic Range:  112 dB A-unweighted, 110 dB unweighted
      • System Performance:
        • Dynamic Range:  110 dB unweighted, >107 dB weighted
        • THD + N:  0.002% typical at +4 dBu, 1 kHz, 0 dB input gain
        • Frequency Response:  20 Hz - 20 kHz, +/-0.5 dB
        • Interchannel Crosstalk:  > 110 dB, 120 dB typical
        • Crosstalk Input to Output:  > 100 dB
      Real-Time Analyzer Microphone for dbx DriveRack
      DBX RTA-M Real-Time Analyzer Microphone for dbx DriveRack
      The dbx RTA-M real time audio analyzing mic is the perfect accessory tool for the DriveRack PA series (PA, PX, PA+, PA2) and 260. Used in conjunction with the System Setup Wizard and Auto EQ Wizard the RTA-M is ideal for optimizing the ...
      Zone Controller for DriveRack 220i and 260
      DBX ZC-3 Zone Controller for DriveRack 220i and 260
      This remote device provides programmable rotary switch program selection for the dbx DriveRack 220i and 260 devices. It also provides rotary switch programmable source selection, page assignment, or scene selection for the dbx ZonePro ...
      Zone Controller for Driverack
      DBX ZC-2 Zone Controller for Driverack
      The ZC-2 remote device provides computer programmable rotary potentiometer and push-button volume control and muting for the dbx DriveRack 260, 220i and ZonePro devices. The remote device has DIP switches allowing identification with ...
      Zone Controller for Driverack
      DBX ZC-1 Zone Controller for Driverack
      The ZC-1 provides programmable remote volume control for the DriveRack 220i, 260 and ZonePRO devices.The Zone Controllers offer extended utility to the DriveRack® and ZonePRO™ families. The nine Zone Controllers use analog DC voltage to ...
      Zone Controller for Driverack
      DBX ZC-4 Zone Controller for Driverack
      This remote device provides programmable program selection via contact closures for the dbx DriveRack 220i and 260 devices. It also provides contact closure programmable source selection, page assignment, or scene selection for the dbx ...

      Usually ships in 7-14 business days.
      Need it sooner? Call us!

      Click to download

      Add to Cart

      We're sorry, only of this item available



      Call a Sales Pro at for more information

      Serving Contractors, Dealers, and Installers Since 1977

      Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM