Telex TR300M-7127M-XXX
Single-channel VHF Beltpack Transceiver with Mirror Image Frequencies

OUR PART #  TR300M-7127M-XXX

Log In for price!

Don't have an account? Apply today!
Select model: (shipping times are approximate)

VHF Wireless intercom beltpack for use with the BTR-300 base. Offers over 24 hours of battery life using standard AA batteries and over 18 hours using NiMH rechargeable batteries. This is a great choice when budget is the primary concern, but you cannot do without high quality RF performance.

Features

  • Lightweight, small size and is self-contained.
  • 2 separate antennas, one for transmit, the other for receive.
  • Push-to-Talk with Lock-to-Talk feature switch for the TR-300 and Push-to-Transmit with Lock-to-Transmit feature for the TR-300P.
    Specifications
    • Power Requirements: 6 AA cells (Alkaline, NEDA, MN 1500) Nickel-metal hydride optional
    • Current Drain: typical 82 mA
    • Temperature Range: -4° to 130° F (-20° to 55° C)
    • Dimensions (W x H x D): 4.25" x 4.125" x 2.0" (108 x 105 x 51 mm)
    • Weight: 13 oz (369 g) with batteries
    • Transmit Antenna: 1/4 wave wire (attached)
    • Receive Antenna: 1/4 wave wire (attached)
    • Transmit:
      • RF Frequency Range: 150-216 MHz
      • RF Frequency Stability: Crystal Controlled, 0.005%
      • RF Power Output: 50 mW typical
      • Modulation: FM, 3 kHz deviation. 115 micro-seconds Pre-emphasis
      • Modulation Limiter: Internal Compressor
      • Modulation Frequency Range: 300 to 5000 Hz +/-2dB
      • Microphone Audio Input: 30 to 3500 ohms
      • Microphone Input Sensitivity: 2 mV Dynamic, 4 mV Electret
      • Radiated Harmonics and Spurious Emissions: -45 dBC, Exceeds FCC Specifications
      • FCC: Type Accepted Under Parts 90 and 74
    • Receive:
      • RF Frequency Range: 150-216 MHz
      • RF Frequency Stability: Crystal Controlled, 0.005%
      • Type: Dual conversion superheterodyne, FM
      • RF Sensitivity: Less than 0.5 µV for 12 dB SINAD
      • IF Selectivity: 3 dB at 30 kHz (Ceramic Filter)
      • Image Rejection: 70 dB or better
      • Squelch Quieting: 90 dB
      • Squelch Threshold: 3.0 µV (Internal)
      • Signal-to-Noise Ratio: 90 dB
      • Audio Output: 32 mW into 600 ohms (Headset)
      • Distortion: less than 1% at Rated Output

    Telex TR300M-7127M-XXX
    Single-channel VHF Beltpack Transceiver with Mirror Image Frequencies

    OUR PART #  TR300M-7127M-XXX

    Product Information:

    VHF Wireless intercom beltpack for use with the BTR-300 base. Offers over 24 hours of battery life using standard AA batteries and over 18 hours using NiMH rechargeable batteries. This is a great choice when budget is the primary concern, but you cannot do without high quality RF performance.

    Features

    • Lightweight, small size and is self-contained.
    • 2 separate antennas, one for transmit, the other for receive.
    • Push-to-Talk with Lock-to-Talk feature switch for the TR-300 and Push-to-Transmit with Lock-to-Transmit feature for the TR-300P.
      Specifications
      • Power Requirements: 6 AA cells (Alkaline, NEDA, MN 1500) Nickel-metal hydride optional
      • Current Drain: typical 82 mA
      • Temperature Range: -4° to 130° F (-20° to 55° C)
      • Dimensions (W x H x D): 4.25" x 4.125" x 2.0" (108 x 105 x 51 mm)
      • Weight: 13 oz (369 g) with batteries
      • Transmit Antenna: 1/4 wave wire (attached)
      • Receive Antenna: 1/4 wave wire (attached)
      • Transmit:
        • RF Frequency Range: 150-216 MHz
        • RF Frequency Stability: Crystal Controlled, 0.005%
        • RF Power Output: 50 mW typical
        • Modulation: FM, 3 kHz deviation. 115 micro-seconds Pre-emphasis
        • Modulation Limiter: Internal Compressor
        • Modulation Frequency Range: 300 to 5000 Hz +/-2dB
        • Microphone Audio Input: 30 to 3500 ohms
        • Microphone Input Sensitivity: 2 mV Dynamic, 4 mV Electret
        • Radiated Harmonics and Spurious Emissions: -45 dBC, Exceeds FCC Specifications
        • FCC: Type Accepted Under Parts 90 and 74
      • Receive:
        • RF Frequency Range: 150-216 MHz
        • RF Frequency Stability: Crystal Controlled, 0.005%
        • Type: Dual conversion superheterodyne, FM
        • RF Sensitivity: Less than 0.5 µV for 12 dB SINAD
        • IF Selectivity: 3 dB at 30 kHz (Ceramic Filter)
        • Image Rejection: 70 dB or better
        • Squelch Quieting: 90 dB
        • Squelch Threshold: 3.0 µV (Internal)
        • Signal-to-Noise Ratio: 90 dB
        • Audio Output: 32 mW into 600 ohms (Headset)
        • Distortion: less than 1% at Rated Output
      Add to Cart

      We're sorry, only of this item available



      Call a Sales Pro at for more information

      HACKER SAFE certified sites prevent over 99.9% of hacker crime.