JK Audio DAP2
Wireless Phone Audio Interface

OUR PART #  DAP2


Remote Broadcasts over a cell phone?
Simply plug Daptor Two into the 2.5 mm headset jack of any wireless cell phone that accepts a third party headset or earpiece. You can now send and receive audio from your mixer or tape recorder through the cell phone.

Your cell phone will recognize Daptor Two as a headset which will disable the mic and speaker in the cell phone.

Audio Connections - You may use either the XLR input or 1/4" input, not both. The XLR input jack is disconnected when a cable is plugged into the 1/4" input jack. The same is true for the XLR and 1/4"output jacks.

Daptor Two was designed to take advantage of the increasing number of wireless phones that accept third party headsets and earpiece headsets. We've designed a circuit which emulates the electrical characteristics of these headsets. While some wireless phones have the 2.5 mm jack directly on the phone, others require a headset adapter which converts their proprietary connector into the 2.5mm jack. We do not provide this adapter.



Features:
  • XLR and ¼" in and out
  • Passive, no AC or battery power needed
  • Rugged diecast aluminum construction
    Specifications:
    • Inputs:
      • XLR 600 ohms balanced, line level, 0 dBm max input
      • 1/4" mono, unbalanced, line level, 0 dBm max input
    • Outputs:
      • XLR 600 ohms balanced, mic level, -25 dBm avg output
      • 1/4" mono, unbalanced, mic level, -25 dBm avg output
      • Passive, no AC or battery power needed
    • Size: 4.4" x 2.7" x 1.2" (11.2 x 6.9 x 3.5 cm)
    • Weight: 7 ounces

      Click to download

      JK Audio DAP2
      Wireless Phone Audio Interface

      OUR PART #  DAP2

      Product Information:

      Remote Broadcasts over a cell phone?
      Simply plug Daptor Two into the 2.5 mm headset jack of any wireless cell phone that accepts a third party headset or earpiece. You can now send and receive audio from your mixer or tape recorder through the cell phone.

      Your cell phone will recognize Daptor Two as a headset which will disable the mic and speaker in the cell phone.

      Audio Connections - You may use either the XLR input or 1/4" input, not both. The XLR input jack is disconnected when a cable is plugged into the 1/4" input jack. The same is true for the XLR and 1/4"output jacks.

      Daptor Two was designed to take advantage of the increasing number of wireless phones that accept third party headsets and earpiece headsets. We've designed a circuit which emulates the electrical characteristics of these headsets. While some wireless phones have the 2.5 mm jack directly on the phone, others require a headset adapter which converts their proprietary connector into the 2.5mm jack. We do not provide this adapter.



      Features:
      • XLR and ¼" in and out
      • Passive, no AC or battery power needed
      • Rugged diecast aluminum construction
        Specifications:
        • Inputs:
          • XLR 600 ohms balanced, line level, 0 dBm max input
          • 1/4" mono, unbalanced, line level, 0 dBm max input
        • Outputs:
          • XLR 600 ohms balanced, mic level, -25 dBm avg output
          • 1/4" mono, unbalanced, mic level, -25 dBm avg output
          • Passive, no AC or battery power needed
        • Size: 4.4" x 2.7" x 1.2" (11.2 x 6.9 x 3.5 cm)
        • Weight: 7 ounces

          Click to download

          Add to Cart

          We're sorry, only of this item available



          Call a Sales Pro at for more information

          Serving Contractors, Dealers, and Installers Since 1977

          Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM