Audio-Technica AT4040
Large Diaphragm Cardioid Condenser Microphone

OUR PART #  AT4040

Log In for price!

Don't have an account? Apply today!

The AT4040 side-address condenser microphone features an advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics. A marriage of technical precision and artistic inspiration, the AT4040 offers exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility. This ultra-consistent microphone may be used with confidence in a wide variety of studio and live miking applications, even under the stringent demands of digital recording systems. The AT4040’s low-noise circuitry is symmetrical and transformerless, resulting in exceptional transient response and clean output signals for transparent reproduction of even the most troublesome of instruments and sound effects.

Features

  • Technically-advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics
  • Externally polarized (DC bias) true condenser design
  • Exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
  • Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
  • State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
  • Custom shock mount provides superior isolation
  • Switchable 80 Hz hi-pass filter and 10 dB pad

Specifications

  • Element: Externally-polarized (DC bias) condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 20-20,000 Hz
  • Low Frequency Roll-Off: 80 Hz, 12 dB/octave
  • Open Circuit Sensitivity: -32 db (25.1 mV) re 1V at 1Pa
  • Impedance: 100 ohms
  • Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
  • Noise: 12 dB SPL
  • Dynamic Range (typical): 133 dB, 1 kHz at Max SPL
  • Signal-to-Noise Ratio: 82 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 48V DC, 4.2 mA typical
  • Switches: Flat, roll-off; 10 dB pad (nominal)
  • Weight: 12.7 oz
  • Dimensions: 6.69" long, 2.10" maximum body diameter
  • Output Connector: Integral 3-pin XLRM-type
  • Accessories Furnsished: AT8449 shock mount for 5/8"-27 threaded strands;microphone dust cover, protective carrying case
Microphone Windscreen, 1-7/8" Inside Diameter (Black)
WindTech 20/421-BLACK Microphone Windscreen, 1-7/8" Inside Diameter (Black)
Since 1976, WindTech has manufactured the highest quality American made microphone windscreens on the market. They are available in  25  brilliant colors, and a wide variety of shapes and sizes to fit most popular microphones. ...
Isolation Clamp
Audio-Technica AT8471 Isolation Clamp
Microphone isolation clamp that provides effective reduction of stand-transmitted noise. Dependably maintains positioning while securely holding microphone and compatible with 5/8"-27 threaded stands.Fits Audio-Technica Case Style(s): R1, ...
Microphone Shock-Mount for AT4040/4047/4050
Audio-Technica AT8449 Microphone Shock-Mount for AT4040/4047/4050
Shockmount designed for Audio Technica AT4040 / AT4047 / AT4050 microphones.Features: Designed for use with the AT4050, AT4040, AT4033, AT4047 microphones Attenuates noise, shock and vibration transmitted through mic stands, ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
LG Windscreen
Audio-Technica AT8137 LG Windscreen
LG Windscreen for AT4033 and 4050 microphones.
Usually ships in 7-14 business days.
Need it sooner? Call us!

Audio-Technica AT4040
Large Diaphragm Cardioid Condenser Microphone

OUR PART #  AT4040

Product Information:

The AT4040 side-address condenser microphone features an advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics. A marriage of technical precision and artistic inspiration, the AT4040 offers exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility. This ultra-consistent microphone may be used with confidence in a wide variety of studio and live miking applications, even under the stringent demands of digital recording systems. The AT4040’s low-noise circuitry is symmetrical and transformerless, resulting in exceptional transient response and clean output signals for transparent reproduction of even the most troublesome of instruments and sound effects.

Features

  • Technically-advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics
  • Externally polarized (DC bias) true condenser design
  • Exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
  • Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
  • State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
  • Custom shock mount provides superior isolation
  • Switchable 80 Hz hi-pass filter and 10 dB pad

Specifications

  • Element: Externally-polarized (DC bias) condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 20-20,000 Hz
  • Low Frequency Roll-Off: 80 Hz, 12 dB/octave
  • Open Circuit Sensitivity: -32 db (25.1 mV) re 1V at 1Pa
  • Impedance: 100 ohms
  • Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
  • Noise: 12 dB SPL
  • Dynamic Range (typical): 133 dB, 1 kHz at Max SPL
  • Signal-to-Noise Ratio: 82 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 48V DC, 4.2 mA typical
  • Switches: Flat, roll-off; 10 dB pad (nominal)
  • Weight: 12.7 oz
  • Dimensions: 6.69" long, 2.10" maximum body diameter
  • Output Connector: Integral 3-pin XLRM-type
  • Accessories Furnsished: AT8449 shock mount for 5/8"-27 threaded strands;microphone dust cover, protective carrying case
Microphone Windscreen, 1-7/8" Inside Diameter (Black)
WindTech 20/421-BLACK Microphone Windscreen, 1-7/8" Inside Diameter (Black)
Since 1976, WindTech has manufactured the highest quality American made microphone windscreens on the market. They are available in  25  brilliant colors, and a wide variety of shapes and sizes to fit most popular microphones. ...
Isolation Clamp
Audio-Technica AT8471 Isolation Clamp
Microphone isolation clamp that provides effective reduction of stand-transmitted noise. Dependably maintains positioning while securely holding microphone and compatible with 5/8"-27 threaded stands.Fits Audio-Technica Case Style(s): R1, ...
Microphone Shock-Mount for AT4040/4047/4050
Audio-Technica AT8449 Microphone Shock-Mount for AT4040/4047/4050
Shockmount designed for Audio Technica AT4040 / AT4047 / AT4050 microphones.Features: Designed for use with the AT4050, AT4040, AT4033, AT4047 microphones Attenuates noise, shock and vibration transmitted through mic stands, ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
LG Windscreen
Audio-Technica AT8137 LG Windscreen
LG Windscreen for AT4033 and 4050 microphones.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

HACKER SAFE certified sites prevent over 99.9% of hacker crime.