FSR, Inc CDA-2
Computer Video Distribution Amplifier

OUR PART #  CDA-2


The CDA-2 is a computer video distribution amplifier. It takes the input signal from the video card of a computer and splits it to be used by a projector and a monitor. This unit not only splits the signal it also buffers it to ensure absolute signal integrity at the receiving device (projector or monitor). With 300 MHz of bandwidth, the CDA-2 can drive any VGA, Super VGA, XGA or XGA-2 computer video signal up to 50 feet using high resolution cable (for longer runs up to 175 feet use the CDA-2EQA).

Features:

  • Compatible with LCD panels, projectors and monitors
  • Two outputs
  • Metal case provides superior shielding
  • HD 15-pin 5 ft. male-to-male monitor cable included
  • 300 MHz video bandwidth
  • Drive outputs approximately 50 feet
  • Individually buffered outputs
  • UL and CSA approved external power supply (wall plug-in)
  • ID bits passed through to output one (permits monitor to determine video resolution)
  • Locking power connector

Specifications:

  • Video Inputs:
       * Number/type: 1 RGB + Sync
       * Connectors: 15 pin HD female
       * Level (nominal): Analog 0.7V p-p
       * Level (maximum): 2V p-p
       * Impedance: 75 ohms
       * Horizontal Frequency: 15 kHz - 200 kHz
       * Vertical Frequency: 30 Hz - 150 Hz
  • Video Output:
       * Number/type/connector: 2 RGB + Sync/HD-15 male connector
       * Level (nominal): Unity
       * Impedance: 75 ohms
  • Sync:
       * Input/output type: Sync On Green, Composite Sync, Separate Sync (same as input)
       * Input level: 3.0V to 5.0V p-p
       * Output level: TTL to 5.0V p-p
       * Input Impedance: 510 ohms
       * Output impedance: 75 ohms
       * Propagation delay (max): 58 nS
       * Rise/fall time (max): 2 nS
       * Polarity: Positive or negative
  • Bandwidth: >300kHz supporting up to 2048 x 1536 @ 60Hz) QXGA
  • Max Cable Length: Approximately 50’
  • Power AC input: 115VAC, 50/60 Hz, 20 Watts
  • Mounting: Table top
  • Enclosure Type: Metal
  • Dimensions: 3.6" x 2.6" x 1"
  • Weight: 14 oz.

Click to download

FSR, Inc CDA-2
Computer Video Distribution Amplifier

OUR PART #  CDA-2

Product Information:

The CDA-2 is a computer video distribution amplifier. It takes the input signal from the video card of a computer and splits it to be used by a projector and a monitor. This unit not only splits the signal it also buffers it to ensure absolute signal integrity at the receiving device (projector or monitor). With 300 MHz of bandwidth, the CDA-2 can drive any VGA, Super VGA, XGA or XGA-2 computer video signal up to 50 feet using high resolution cable (for longer runs up to 175 feet use the CDA-2EQA).

Features:

  • Compatible with LCD panels, projectors and monitors
  • Two outputs
  • Metal case provides superior shielding
  • HD 15-pin 5 ft. male-to-male monitor cable included
  • 300 MHz video bandwidth
  • Drive outputs approximately 50 feet
  • Individually buffered outputs
  • UL and CSA approved external power supply (wall plug-in)
  • ID bits passed through to output one (permits monitor to determine video resolution)
  • Locking power connector

Specifications:

  • Video Inputs:
       * Number/type: 1 RGB + Sync
       * Connectors: 15 pin HD female
       * Level (nominal): Analog 0.7V p-p
       * Level (maximum): 2V p-p
       * Impedance: 75 ohms
       * Horizontal Frequency: 15 kHz - 200 kHz
       * Vertical Frequency: 30 Hz - 150 Hz
  • Video Output:
       * Number/type/connector: 2 RGB + Sync/HD-15 male connector
       * Level (nominal): Unity
       * Impedance: 75 ohms
  • Sync:
       * Input/output type: Sync On Green, Composite Sync, Separate Sync (same as input)
       * Input level: 3.0V to 5.0V p-p
       * Output level: TTL to 5.0V p-p
       * Input Impedance: 510 ohms
       * Output impedance: 75 ohms
       * Propagation delay (max): 58 nS
       * Rise/fall time (max): 2 nS
       * Polarity: Positive or negative
  • Bandwidth: >300kHz supporting up to 2048 x 1536 @ 60Hz) QXGA
  • Max Cable Length: Approximately 50’
  • Power AC input: 115VAC, 50/60 Hz, 20 Watts
  • Mounting: Table top
  • Enclosure Type: Metal
  • Dimensions: 3.6" x 2.6" x 1"
  • Weight: 14 oz.

Click to download

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM