Audio-Technica AT4060
Large Diaphragm Tube Condenser Microphone, Cardioid

OUR PART #  AT4060

Log In for price!

Don't have an account? Apply today!

Audio-Technica’s AT4060 cardioid vacuum tube condenser brings the warmth of vintage tube sound to every shade of the SPL spectrum. With a dynamic range that far exceeds that of other tube microphones, it as easily captures the subtlest nuances of vocal and instrumental performance as it handles guitar cabinets and other extreme SPL environments. Featuring hand-selected, individually tested and aged tubes, the AT4060 achieves the coveted, classic sound of valve design without compromising the specification standards required for the most demanding recording situations.

Audio-Technica takes no chances with this microphone’s consistency and reliability: every AT4060 is individually tested and inspected for 100 percent quality assurance—rare in today’s world of mass-marketed studio microphones.

Features

  • Vintage tube sound with the versatile performance necessary for the most demanding studio applications
  • Wide dynamic range, low self-noise and high max SPL capability
  • The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics achieved remain constant over years of use
  • Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
  • Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
  • Regulated and heavily filtered heater current prevents noise contamination of audio signal chain
  • Hand-selected tubes are individually tested and aged to maintain peak performance
  • Large coupling transformer provides superior low-frequency linearity
  • Custom shock mount provides superior isolation

Specifications

  • Element: Externally-polarized (DC bias) condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 20-20,000 Hz
  • Open Circuit Sensitivity: -34dB (19.9 mV) re 1V at 1 Pa
  • Impedance: 200 ohms
  • Maximum Input Sound Level: 150 dB SPL, 1 kHz at 1% T.H.D.; 149 dB SPL, with 10 dB pad (nominal)
  • Noise: 19 dB SPL
  • Dynamice Range (Typical): 131 dB, 1 kHz at Max SPL
  • Signal-to-Noise Ratio: 75 dB, 1 kHz at 1 Pa
  • Power Requirements: AT8560 power supply (120V/230V AC)
  • Weight (Microphone): 22.6 oz
  • Weight (Power Supply): 4.19 lbs
  • Dimensions (Microphone): 8.27" long, 2.10" maximum body diameter
  • Dimensions (Power Supply, W x D x H): 8.27" x 8.86" x 1.73"
  • Output Connector: XLRM-type (on power supply)
  • Cables: 32.8' cable with 6-pin XLR-type connectors for use between microphone and power supply; AC power supply cable
  • Accessories Furnished: AT8560 power supply; AT8447 shock mount for 5/8"-27 threaded stands; rack-mount adapters for power supply; protective mic carrying case
Microphone Windscreen, 1-7/8" Inside Diameter (Black)
WindTech 20/421-BLACK Microphone Windscreen, 1-7/8" Inside Diameter (Black)
Since 1976, WindTech has manufactured the highest quality American made microphone windscreens on the market. They are available in  25  brilliant colors, and a wide variety of shapes and sizes to fit most popular microphones. ...
LG Windscreen
Audio-Technica AT8137 LG Windscreen
LG Windscreen for AT4033 and 4050 microphones.
Usually ships in 7-14 business days.
Need it sooner? Call us!

Audio-Technica AT4060
Large Diaphragm Tube Condenser Microphone, Cardioid

OUR PART #  AT4060

Product Information:

Audio-Technica’s AT4060 cardioid vacuum tube condenser brings the warmth of vintage tube sound to every shade of the SPL spectrum. With a dynamic range that far exceeds that of other tube microphones, it as easily captures the subtlest nuances of vocal and instrumental performance as it handles guitar cabinets and other extreme SPL environments. Featuring hand-selected, individually tested and aged tubes, the AT4060 achieves the coveted, classic sound of valve design without compromising the specification standards required for the most demanding recording situations.

Audio-Technica takes no chances with this microphone’s consistency and reliability: every AT4060 is individually tested and inspected for 100 percent quality assurance—rare in today’s world of mass-marketed studio microphones.

Features

  • Vintage tube sound with the versatile performance necessary for the most demanding studio applications
  • Wide dynamic range, low self-noise and high max SPL capability
  • The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics achieved remain constant over years of use
  • Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
  • Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
  • Regulated and heavily filtered heater current prevents noise contamination of audio signal chain
  • Hand-selected tubes are individually tested and aged to maintain peak performance
  • Large coupling transformer provides superior low-frequency linearity
  • Custom shock mount provides superior isolation

Specifications

  • Element: Externally-polarized (DC bias) condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 20-20,000 Hz
  • Open Circuit Sensitivity: -34dB (19.9 mV) re 1V at 1 Pa
  • Impedance: 200 ohms
  • Maximum Input Sound Level: 150 dB SPL, 1 kHz at 1% T.H.D.; 149 dB SPL, with 10 dB pad (nominal)
  • Noise: 19 dB SPL
  • Dynamice Range (Typical): 131 dB, 1 kHz at Max SPL
  • Signal-to-Noise Ratio: 75 dB, 1 kHz at 1 Pa
  • Power Requirements: AT8560 power supply (120V/230V AC)
  • Weight (Microphone): 22.6 oz
  • Weight (Power Supply): 4.19 lbs
  • Dimensions (Microphone): 8.27" long, 2.10" maximum body diameter
  • Dimensions (Power Supply, W x D x H): 8.27" x 8.86" x 1.73"
  • Output Connector: XLRM-type (on power supply)
  • Cables: 32.8' cable with 6-pin XLR-type connectors for use between microphone and power supply; AC power supply cable
  • Accessories Furnished: AT8560 power supply; AT8447 shock mount for 5/8"-27 threaded stands; rack-mount adapters for power supply; protective mic carrying case
Microphone Windscreen, 1-7/8" Inside Diameter (Black)
WindTech 20/421-BLACK Microphone Windscreen, 1-7/8" Inside Diameter (Black)
Since 1976, WindTech has manufactured the highest quality American made microphone windscreens on the market. They are available in  25  brilliant colors, and a wide variety of shapes and sizes to fit most popular microphones. ...
LG Windscreen
Audio-Technica AT8137 LG Windscreen
LG Windscreen for AT4033 and 4050 microphones.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

HACKER SAFE certified sites prevent over 99.9% of hacker crime.