Bag End TA5000-I
Time-Align Loudspeaker, Painted Installation Finish

OUR PART #  TA5000-I


The TA5000-I is a permanent installation full range loudspeaker system offering both high fidelity and high efficiency. The Time-Aligned™ studio quality sound provides detail and clarity not found in other designs. Rugged birch plywood finished with our beautiful utility black textured lacquer and a black steel grille will fit nicely into almost any application. Optional flying attachment points allow for safe and convenient rigging.

Applications

  • Auditorium Sound Reinforcement
  • Church Sound Reinforcement
  • Nightclub Applications
  • DJ System Installation

Specifications

  • Enclosure: 18 mm 13-ply birch plywood
  • Low Frequency Transducer: 15" Cone, 2.5" Voice coil, 80 oz. Magnet
  • High Frequency Transducer: 1" Exit compression driver, 1.25" Titanium diaphragm, 24 oz. Magnet, Exponential horn
  • Input Connectors: Cinch 142 screw terminal barrier strip
  • Grille: 16 Gauge black vinyl coated perforated steel
  • Optional Hardware: Rigging points
  • System type: 2-way vented - 3.4 cu. ft.
  • Impedance: 8 Ohms
  • Crossover Network: Passive Time-Align equalizer type at 1.7 kHz
  • Time Offset Between Drivers: < +/- 25 Microseconds
  • Frequency Response: 50 Hz to 19 kHz +/- 3 dB (4 pi Steradians)
  • Sensitivity: 101 dB SPL (1W @ 1m)
  • Dispersion: 90 degrees Horizontal (-6 dB), 40 degrees Vertical (-6 dB)
  • Power Handling: 200 W continuous sine wave, 800 W instantaneous peak
  • Finish: Black textured lacquer
  • Dimensions: 27"h x 22"w x 18"d, Trapezoidal, 8 degree taper per side
  • Weight: 75 lbs.
  • Shipping Dimensions: 21" x 30" x 25"
  • Shipping Weight: 83 lbs.

Click to download

Bag End TA5000-I
Time-Align Loudspeaker, Painted Installation Finish

OUR PART #  TA5000-I

Product Information:

The TA5000-I is a permanent installation full range loudspeaker system offering both high fidelity and high efficiency. The Time-Aligned™ studio quality sound provides detail and clarity not found in other designs. Rugged birch plywood finished with our beautiful utility black textured lacquer and a black steel grille will fit nicely into almost any application. Optional flying attachment points allow for safe and convenient rigging.

Applications

  • Auditorium Sound Reinforcement
  • Church Sound Reinforcement
  • Nightclub Applications
  • DJ System Installation

Specifications

  • Enclosure: 18 mm 13-ply birch plywood
  • Low Frequency Transducer: 15" Cone, 2.5" Voice coil, 80 oz. Magnet
  • High Frequency Transducer: 1" Exit compression driver, 1.25" Titanium diaphragm, 24 oz. Magnet, Exponential horn
  • Input Connectors: Cinch 142 screw terminal barrier strip
  • Grille: 16 Gauge black vinyl coated perforated steel
  • Optional Hardware: Rigging points
  • System type: 2-way vented - 3.4 cu. ft.
  • Impedance: 8 Ohms
  • Crossover Network: Passive Time-Align equalizer type at 1.7 kHz
  • Time Offset Between Drivers: < +/- 25 Microseconds
  • Frequency Response: 50 Hz to 19 kHz +/- 3 dB (4 pi Steradians)
  • Sensitivity: 101 dB SPL (1W @ 1m)
  • Dispersion: 90 degrees Horizontal (-6 dB), 40 degrees Vertical (-6 dB)
  • Power Handling: 200 W continuous sine wave, 800 W instantaneous peak
  • Finish: Black textured lacquer
  • Dimensions: 27"h x 22"w x 18"d, Trapezoidal, 8 degree taper per side
  • Weight: 75 lbs.
  • Shipping Dimensions: 21" x 30" x 25"
  • Shipping Weight: 83 lbs.

Click to download

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM