Countryman B3P4FF05B
B3 Lavalier Microphone for Phantom-Powered, Black

OUR PART #  B3P4FF05B

Log In for price!

Don't have an account? Apply today!

The B3 lavalier mic is an amazing 4.6mm in diameter and virtually disappears on the wearer. An omnidirectional condenser mic, the B3 has an ultra-flat frequency response from 10-25,000Hz with SPL handling to 150dB. A rugged Kevlar reinforced cable provides extremely low handling noise and the B3 is moisture and makeup resistant with an easily washable protective screen. Five colors are available: Black, White, Light Skin, Cocoa and Gray. The B3 may be ordered with XLR/phantom termination or pre-wired for a variety of wireless transmitters.

Countryman B3P4FF05B Features:

  • Extremely Small: Looks great when you want to see it, Hides easily when you don't.
  • Water Resistant: The B3 withstands moisture and perspiration. It will even survive an overnight bath in your favorite colabeverage.
  • Makeup Resistant: The protective cap on the B3 iseasily removed for cleaning or replacement when clogged with makeup.
  • Low Handling Noise: With Kevlar reinforced cable and an ultra thin diaphragm, the B3 sets a new standard for low handling noise.
  • Selectable High Frequency Response: Protective caps change high frequency response.
  • Handles High Sound Levels: Up to 150dB SPL on 48V Phantom Power
  • Available in Five Colors: Black, White, Light Skin, Cocoa, Gray

    Countryman B3P4FF05B Specifications:

    • Compatibility: Designed to operate with any balanced microphone input providing Phantom power
    • Frequency Response: 20Hz to 20kHz +- 3dB
    • Sensitivity (2k ohm load): 10mV/Pa for P/NB3P4FF05xxx; 1mV/Pa for P/NB3P6FF05xxx
    • Equivalent Acoustic Noise: 24dB SPL A-Weighted
    • Maximum Sound Pressure: 150 dB (48V, 1mV/Pa mike)
    • Power Requirements: 9V to 48V Phantom (4mA @ 48V)
    • Output Impedance: 600 ohms, balanced
    • Output Connector: XLR-3 Male (contains preamp)
    • Dimensions: .23" x .18" (5.8mm x 4.6mm)
    • Weight: .012 oz (.34 g)
    • Supplied Accessories: Carrying case, tie clip and wind screen.
    Single Tie Clip for B3 Omni Lavalier, set of 1 black and 1 white
    Countryman B3CLIP Single Tie Clip for B3 Omni Lavalier, set of 1 black and 1 white
    The standard tie clip comes in black and white; both colors are provided with the B3.  This lightweight plastic clip is a good choice for ties and lapels. The white clip can be colored with a felt pen if a custom color match is ...
    Flat Response Protective Cap for B3 Lavalier Microphone, Black
    Countryman B3CAP1-B0 Flat Response Protective Cap for B3 Lavalier Microphone, Black
    Countryman's B3 lavalier should always be used with a protective cap in place to keep sweat, makeup and other foreign material out of the microphone.  The three omni caps each have a different high frequency response characteristic ...
    Double Tie Clip for B3,Black
    Countryman B3DCLIP-B Double Tie Clip for B3,Black
    The double tie clip can hold two B3 lavaliers for applications where low-profile redundancy is important.
    Usually ships in 7-14 business days.
    Need it sooner? Call us!
    Magnetic Clip for B3, Black
    Countryman B3MCLIP B Magnetic Clip for B3, Black
    The magnetic clip consists of two halves that can be placed on either side of a piece of cloth and clamp together magnetically. The inner piece has a lanyard made of clear nylon line, which can be hooked over a button to make retrieval ...
    Usually ships in 7-14 business days.
    Need it sooner? Call us!
    Viper Clip for B3.Black
    Countryman B3VCLIP-B Viper Clip for B3.Black
    The viper grip clip has two pins on the back to slide securely into cloth at any angle. The clip is designed to hold the microphone a fraction of an inch away from the back plate.The viper grip is a good choice for discrete placement on ...
    Usually ships in 7-14 business days.
    Need it sooner? Call us!
    Replacement beltclip
    Usually ships in 7-14 business days.
    Need it sooner? Call us!
    Birght Response (+4dB) Protective Cap for B3 Lavalier Microphone, Black
    Countryman B3CAP1-B4 Birght Response (+4dB) Protective Cap for B3 Lavalier Microphone, Black
    Countryman's B3 lavalier should always be used with a protective cap in place to keep sweat, makeup and other foreign material out of the microphone.  The three omni caps each have a different high frequency response characteristic ...
    Usually ships in 7-14 business days.
    Need it sooner? Call us!
    Very Bright Response (+8dB) Protective Cap for B3 Lavalier Microphone, Black
    Countryman B3CAP1-B8 Very Bright Response (+8dB) Protective Cap for B3 Lavalier Microphone, Black
    Countryman's B3 lavalier should always be used with a protective cap in place to keep sweat, makeup and other foreign material out of the microphone.  The three omni caps each have a different high frequency response characteristic ...
    Usually ships in 7-14 business days.
    Need it sooner? Call us!

    Countryman B3P4FF05B
    B3 Lavalier Microphone for Phantom-Powered, Black

    OUR PART #  B3P4FF05B

    Product Information:

    The B3 lavalier mic is an amazing 4.6mm in diameter and virtually disappears on the wearer. An omnidirectional condenser mic, the B3 has an ultra-flat frequency response from 10-25,000Hz with SPL handling to 150dB. A rugged Kevlar reinforced cable provides extremely low handling noise and the B3 is moisture and makeup resistant with an easily washable protective screen. Five colors are available: Black, White, Light Skin, Cocoa and Gray. The B3 may be ordered with XLR/phantom termination or pre-wired for a variety of wireless transmitters.

    Countryman B3P4FF05B Features:

    • Extremely Small: Looks great when you want to see it, Hides easily when you don't.
    • Water Resistant: The B3 withstands moisture and perspiration. It will even survive an overnight bath in your favorite colabeverage.
    • Makeup Resistant: The protective cap on the B3 iseasily removed for cleaning or replacement when clogged with makeup.
    • Low Handling Noise: With Kevlar reinforced cable and an ultra thin diaphragm, the B3 sets a new standard for low handling noise.
    • Selectable High Frequency Response: Protective caps change high frequency response.
    • Handles High Sound Levels: Up to 150dB SPL on 48V Phantom Power
    • Available in Five Colors: Black, White, Light Skin, Cocoa, Gray

      Countryman B3P4FF05B Specifications:

      • Compatibility: Designed to operate with any balanced microphone input providing Phantom power
      • Frequency Response: 20Hz to 20kHz +- 3dB
      • Sensitivity (2k ohm load): 10mV/Pa for P/NB3P4FF05xxx; 1mV/Pa for P/NB3P6FF05xxx
      • Equivalent Acoustic Noise: 24dB SPL A-Weighted
      • Maximum Sound Pressure: 150 dB (48V, 1mV/Pa mike)
      • Power Requirements: 9V to 48V Phantom (4mA @ 48V)
      • Output Impedance: 600 ohms, balanced
      • Output Connector: XLR-3 Male (contains preamp)
      • Dimensions: .23" x .18" (5.8mm x 4.6mm)
      • Weight: .012 oz (.34 g)
      • Supplied Accessories: Carrying case, tie clip and wind screen.
      Single Tie Clip for B3 Omni Lavalier, set of 1 black and 1 white
      Countryman B3CLIP Single Tie Clip for B3 Omni Lavalier, set of 1 black and 1 white
      The standard tie clip comes in black and white; both colors are provided with the B3.  This lightweight plastic clip is a good choice for ties and lapels. The white clip can be colored with a felt pen if a custom color match is ...
      Flat Response Protective Cap for B3 Lavalier Microphone, Black
      Countryman B3CAP1-B0 Flat Response Protective Cap for B3 Lavalier Microphone, Black
      Countryman's B3 lavalier should always be used with a protective cap in place to keep sweat, makeup and other foreign material out of the microphone.  The three omni caps each have a different high frequency response characteristic ...
      Double Tie Clip for B3,Black
      Countryman B3DCLIP-B Double Tie Clip for B3,Black
      The double tie clip can hold two B3 lavaliers for applications where low-profile redundancy is important.
      Usually ships in 7-14 business days.
      Need it sooner? Call us!
      Magnetic Clip for B3, Black
      Countryman B3MCLIP B Magnetic Clip for B3, Black
      The magnetic clip consists of two halves that can be placed on either side of a piece of cloth and clamp together magnetically. The inner piece has a lanyard made of clear nylon line, which can be hooked over a button to make retrieval ...
      Usually ships in 7-14 business days.
      Need it sooner? Call us!
      Viper Clip for B3.Black
      Countryman B3VCLIP-B Viper Clip for B3.Black
      The viper grip clip has two pins on the back to slide securely into cloth at any angle. The clip is designed to hold the microphone a fraction of an inch away from the back plate.The viper grip is a good choice for discrete placement on ...
      Usually ships in 7-14 business days.
      Need it sooner? Call us!
      Replacement beltclip
      Usually ships in 7-14 business days.
      Need it sooner? Call us!
      Birght Response (+4dB) Protective Cap for B3 Lavalier Microphone, Black
      Countryman B3CAP1-B4 Birght Response (+4dB) Protective Cap for B3 Lavalier Microphone, Black
      Countryman's B3 lavalier should always be used with a protective cap in place to keep sweat, makeup and other foreign material out of the microphone.  The three omni caps each have a different high frequency response characteristic ...
      Usually ships in 7-14 business days.
      Need it sooner? Call us!
      Very Bright Response (+8dB) Protective Cap for B3 Lavalier Microphone, Black
      Countryman B3CAP1-B8 Very Bright Response (+8dB) Protective Cap for B3 Lavalier Microphone, Black
      Countryman's B3 lavalier should always be used with a protective cap in place to keep sweat, makeup and other foreign material out of the microphone.  The three omni caps each have a different high frequency response characteristic ...
      Usually ships in 7-14 business days.
      Need it sooner? Call us!
      Add to Cart

      We're sorry, only of this item available



      Call a Sales Pro at for more information

      Serving Contractors, Dealers, and Installers Since 1977

      Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM