TecNec SVDA-1
Dist Amp,1x4 S-Video

OUR PART #  SVDA-1


 1X4 SVHS Video Distribution Amplifier.

The SVDA-1 is a 4 output S-Video distribution amplifier designed for the Broadcast, Video Production and Multimedia environments. Its most common application will be to distribute the output of a VCR or other S-Video to Switchers, Routers, Monitors and other VCRs while maintaining picture quality. The SVDA-1 comes shipped ready to use. The proper Wall Transformer is supplied. Simply connect your source to the SVDA-1 Input and connect outputs as needed. Under most circumstances no gain adjustment should be required. The unit is shipped with gain set for unity. A 1Vp-p input will produce 4 1Vp-p outputs. However, if your Input level is low or the outputs are driving long (>200 ft.) cables, the Y and C gain may need to be adjusted.

  • INPUT: 4-pin mini Din (SVHS) Y-Channel 1Vp-p terminated C-Channel 1Vp-p terminated
  • OUTPUT: Four 4-pin mini Din Y-Channel 1Vp-p C-Channel 1Vp-p Impedance 751/2 Noise > 60dB below 1Vp-p
  • Frequency Response DC - 10MHz +/-3dB Y/C Delay < 2ns
  • GAIN: -4.5dB to +3dB both Y & C .6V p-p to 1.4Vp-p Y channel .45V p-p to 1.05Vp-p C channel POWER: 12VDC (18VDC Max) @ 200ma Max. Wall Transformer (Supplied)
  • DIMENSION: 4"W x 5"L x 7/8"

TecNec SVDA-1
Dist Amp,1x4 S-Video

OUR PART #  SVDA-1

Product Information:

 1X4 SVHS Video Distribution Amplifier.

The SVDA-1 is a 4 output S-Video distribution amplifier designed for the Broadcast, Video Production and Multimedia environments. Its most common application will be to distribute the output of a VCR or other S-Video to Switchers, Routers, Monitors and other VCRs while maintaining picture quality. The SVDA-1 comes shipped ready to use. The proper Wall Transformer is supplied. Simply connect your source to the SVDA-1 Input and connect outputs as needed. Under most circumstances no gain adjustment should be required. The unit is shipped with gain set for unity. A 1Vp-p input will produce 4 1Vp-p outputs. However, if your Input level is low or the outputs are driving long (>200 ft.) cables, the Y and C gain may need to be adjusted.

  • INPUT: 4-pin mini Din (SVHS) Y-Channel 1Vp-p terminated C-Channel 1Vp-p terminated
  • OUTPUT: Four 4-pin mini Din Y-Channel 1Vp-p C-Channel 1Vp-p Impedance 751/2 Noise > 60dB below 1Vp-p
  • Frequency Response DC - 10MHz +/-3dB Y/C Delay < 2ns
  • GAIN: -4.5dB to +3dB both Y & C .6V p-p to 1.4Vp-p Y channel .45V p-p to 1.05Vp-p C channel POWER: 12VDC (18VDC Max) @ 200ma Max. Wall Transformer (Supplied)
  • DIMENSION: 4"W x 5"L x 7/8"
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM