Audio-Technica PRO42
Miniature Cardioid Condenser Boundary Microphone

OUR PART #  PRO42


The Audio-Technica's PRO 42's low-profile design assures inconspicuous appearance for surface-mount use in boardroom, school, government, house of worship and other installed applications. Designed for sound reinforcement, broadcasting and recording applications, the PRO 42 brings crisp, intelligible audio reproduction to the podium, stage, conference table and beyond. With a wide-range condenser element and low-mass diaphragm for superior performance, the microphone is equipped with self-contained electronics, eliminating the need for external power modules.

Audio-Technica PRO42 Features:

  • Very low-profile design for minimum visibility
  • Wide-range condenser element with low-mass diaphragm for superior performance
  • Uniform polar pattern for maximum rejection of unwanted sounds
  • Rugged design and construction
  • 25' (7.6 m) cable permanently attached between microphone and XLR-M connector

Audio-Technica PRO42 Specifications:

  • Elements: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Half-Cardioid (cardioid in hemisphere above mounting surface)
  • Frequency Response: 70 Hz - 14 kHz
  • Open Circuit Sensitivity: -38 dB (12.5 mV) re 1V at 1 Pa
  • Impedance: 100 ohms
  • Maximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range (typical): 105 dB, 1kHz at Max SPL
  • Signal-to-Noise Ratio: 65 dB, 1kHz at 1 Pa
  • Phantom Power Requirements: 9-52V DC, 2 mA typical
  • Weight: 1.2 oz
  • Dimensions: 1.44" max width, 2.14" max length, 0.61" height
  • Output Connector: 3-pin XLR-M on cable
  • Cable: 25 ft long, permanently attached
48V Single Channel Phantom Power Supply
Audio-Technica AT8801 48V Single Channel Phantom Power Supply
The Audio-Technica AT8801 provides 48V phantom power for a single microphone. It is a line-powered device that allows the use of remote-powered microphones with systems that do not supply phantom power.Audio-Technica AT8801 Features: ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Lo-Z/Hi-Z Adapter
Audio-Technica CP8201 Lo-Z/Hi-Z Adapter
The Audio-Technica CP8201 Microphone Impedance Matching Transformer is designed to connect a low-impedance microphone to a high-impedance electronic input. The high-quality transformer solves the problem of excessive high-frequency loss ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Audio-Technica PRO42
Miniature Cardioid Condenser Boundary Microphone

OUR PART #  PRO42

Product Information:

The Audio-Technica's PRO 42's low-profile design assures inconspicuous appearance for surface-mount use in boardroom, school, government, house of worship and other installed applications. Designed for sound reinforcement, broadcasting and recording applications, the PRO 42 brings crisp, intelligible audio reproduction to the podium, stage, conference table and beyond. With a wide-range condenser element and low-mass diaphragm for superior performance, the microphone is equipped with self-contained electronics, eliminating the need for external power modules.

Audio-Technica PRO42 Features:

  • Very low-profile design for minimum visibility
  • Wide-range condenser element with low-mass diaphragm for superior performance
  • Uniform polar pattern for maximum rejection of unwanted sounds
  • Rugged design and construction
  • 25' (7.6 m) cable permanently attached between microphone and XLR-M connector

Audio-Technica PRO42 Specifications:

  • Elements: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Half-Cardioid (cardioid in hemisphere above mounting surface)
  • Frequency Response: 70 Hz - 14 kHz
  • Open Circuit Sensitivity: -38 dB (12.5 mV) re 1V at 1 Pa
  • Impedance: 100 ohms
  • Maximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range (typical): 105 dB, 1kHz at Max SPL
  • Signal-to-Noise Ratio: 65 dB, 1kHz at 1 Pa
  • Phantom Power Requirements: 9-52V DC, 2 mA typical
  • Weight: 1.2 oz
  • Dimensions: 1.44" max width, 2.14" max length, 0.61" height
  • Output Connector: 3-pin XLR-M on cable
  • Cable: 25 ft long, permanently attached
48V Single Channel Phantom Power Supply
Audio-Technica AT8801 48V Single Channel Phantom Power Supply
The Audio-Technica AT8801 provides 48V phantom power for a single microphone. It is a line-powered device that allows the use of remote-powered microphones with systems that do not supply phantom power.Audio-Technica AT8801 Features: ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Lo-Z/Hi-Z Adapter
Audio-Technica CP8201 Lo-Z/Hi-Z Adapter
The Audio-Technica CP8201 Microphone Impedance Matching Transformer is designed to connect a low-impedance microphone to a high-impedance electronic input. The high-quality transformer solves the problem of excessive high-frequency loss ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM