Shure 515SBGX
Microphone without Gooseneck or Mounting Flange

OUR PART #  515SB-GX


The Shure 515SBGX microphones are low-impedance dynamic microphones designed to be mounted on flexible goosenecks or fixed pips. Optimized frequency response and a unidirectional (cardioid) pickup patter makes them ideal for language labs, paging applications, and base station communications. They are also recommended for use as talkback or cuing microphones in TV, film, and recording studios. Because of their low impedance, these microphones retain their level and response characteristics even when long lengths of cable are used.
The Shure 515SBGX is supplied with a push-to-talk button and a four-conductor cable (two conductors shielded).

Shure 515SBGX Features:

  • Frequency response designed for voice intelligibility
  • Directional mic element with internal shock mount
  • Die-cast zinc case and grill
  • Does not require DC power for operation
  • PTT switch activates mic element and external logic(if required)
  • Four conductor, shielded, bare-ended cable
  • Attaches to gooseneck (not included) if desired

Shure 515SBGX Specifications:

  • Type: Dynamic (moving coil)
  • Frequency Response: 80Hz - 15 kHz
  • Polar Pattern: Cardioid (unidirectional). Effectiverejection of sound at rear of microphone is uniform with frequency; frontpickup characteristics are symmetrical about axis.
  • Impedance: 150 ohms rated (180 ohms actual)
  • Output Level: Open Circuit Voltage: -57 dBV/Pa* (1.4 mV) *1 PA = 94 DBSPL
12" Chrome Gooseneck
Shure G12 12" Chrome Gooseneck
12 inch (30.48 cm) chrome gooseneck.
Heavy Duty Mounting Flange
Shure A13HD Heavy Duty Mounting Flange
The A13HD is a silver, heavy-duty microphone stand, mounting flange designed for flush-mounting into desktops, podiums, etc. The A13HD features a 5/8"-27 threaded fitting for compatible goosenecks, microphone mounting shafts, etc.
Heavy Duty Mounting Flange, black finish
Shure A13HDB Heavy Duty Mounting Flange, black finish
A heavy-duty mounting flange with black finish.
Windscreen
Shure A85WS Windscreen
Foam windscreen for SM85, SM86, SM87A, Beta 87A, Beta 87C and BG5.1 microphones.
5/8"-27 Threaded Mounting Flange for Gooseneck Microphone in Matte Silver
Shure A12 5/8"-27 Threaded Mounting Flange for Gooseneck Microphone in Matte Silver
Shure's A12 is a 5/8"-27 threaded mounting flange for gooseneck microphones in matte silver.
Foam windscreen (gray)
Shure A1WS Foam windscreen (gray)
Gray foam windscreen for 10A, all 515 Series, Beta 56, Beta 56A and Beta 57 microphones.

Shure 515SBGX
Microphone without Gooseneck or Mounting Flange

OUR PART #  515SB-GX

Product Information:

The Shure 515SBGX microphones are low-impedance dynamic microphones designed to be mounted on flexible goosenecks or fixed pips. Optimized frequency response and a unidirectional (cardioid) pickup patter makes them ideal for language labs, paging applications, and base station communications. They are also recommended for use as talkback or cuing microphones in TV, film, and recording studios. Because of their low impedance, these microphones retain their level and response characteristics even when long lengths of cable are used.
The Shure 515SBGX is supplied with a push-to-talk button and a four-conductor cable (two conductors shielded).

Shure 515SBGX Features:

  • Frequency response designed for voice intelligibility
  • Directional mic element with internal shock mount
  • Die-cast zinc case and grill
  • Does not require DC power for operation
  • PTT switch activates mic element and external logic(if required)
  • Four conductor, shielded, bare-ended cable
  • Attaches to gooseneck (not included) if desired

Shure 515SBGX Specifications:

  • Type: Dynamic (moving coil)
  • Frequency Response: 80Hz - 15 kHz
  • Polar Pattern: Cardioid (unidirectional). Effectiverejection of sound at rear of microphone is uniform with frequency; frontpickup characteristics are symmetrical about axis.
  • Impedance: 150 ohms rated (180 ohms actual)
  • Output Level: Open Circuit Voltage: -57 dBV/Pa* (1.4 mV) *1 PA = 94 DBSPL
12" Chrome Gooseneck
Shure G12 12" Chrome Gooseneck
12 inch (30.48 cm) chrome gooseneck.
Heavy Duty Mounting Flange
Shure A13HD Heavy Duty Mounting Flange
The A13HD is a silver, heavy-duty microphone stand, mounting flange designed for flush-mounting into desktops, podiums, etc. The A13HD features a 5/8"-27 threaded fitting for compatible goosenecks, microphone mounting shafts, etc.
Heavy Duty Mounting Flange, black finish
Shure A13HDB Heavy Duty Mounting Flange, black finish
A heavy-duty mounting flange with black finish.
Windscreen
Shure A85WS Windscreen
Foam windscreen for SM85, SM86, SM87A, Beta 87A, Beta 87C and BG5.1 microphones.
5/8"-27 Threaded Mounting Flange for Gooseneck Microphone in Matte Silver
Shure A12 5/8"-27 Threaded Mounting Flange for Gooseneck Microphone in Matte Silver
Shure's A12 is a 5/8"-27 threaded mounting flange for gooseneck microphones in matte silver.
Foam windscreen (gray)
Shure A1WS Foam windscreen (gray)
Gray foam windscreen for 10A, all 515 Series, Beta 56, Beta 56A and Beta 57 microphones.
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM