Shure MX202BP/C
Microflex Cardioid Mini-Condenser Overhead Microphone with Plate Mount Preamplifier

OUR PART #  MX202BP/C

Log In for price!

Don't have an account? Apply today!

The Shure MX202BP/C Microflex Overhead cardioid condenser microphone captures Shure-quality sound in an adjustable compact package. The MX202BP/C features a flexible 4" gooseneck, a plate-mounted preamplifier, and a 30 foot cable.

When combined with the high-sensitivity cartridge's wide frequency response, this microphone provides accurate sound reproduction with a minimum of RF interference or electromagnetic hum. The MX202BP/C works with interchangeable cardioid (included ), supercardioid and omnidirectional condenser cartridges, which fit every model in the Microflex product line for enhanced convenience and consistent sound.

Shure MX202BP/C Features:

  • Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
  • Interchangeable cartridges that provide an optimal polar pattern choice for each application
  • Balanced, transformerless output for increased immunity to noise over long cable runs

Shure MX202BP/C Specifications:

  • Frequency Response: 50 Hz to 17 kHz
  • Polar Pattern: Cardioid
  • Output Impedance: EIA Rated at 150 ohms (180 ohms actual)
  • Maximum SPL (1 kHz at 1% THD, 1 kohm load): 124.2 dB
    • Sensitivity (At 1,000 Hz, open circuit voltage): –35.0 dBV/Pa (17.8 mV)
  • Equivalent Output Noise (A-weighted): 28.0 dB SPL
  • Signal to Noise Ratio (referenced at 94 dB SPL): 66.0dB
  • Dynamic Range at 1 kohm Load: 96.2 dB
  • Common Mode Rejection: 45.0 dB minimum
  • Preamplifier Output Clipping Level (1% THD): –6.0 dBV(0.5 V)
  • Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
  • Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
  • Environmental Requirements
    • Operating Temperature Range: –18° C to 57° C (0° F to 135° F)
    • Relative Humidity: 0 to 95%
Black Omnidirectional Replacement Cartridge
Shure R183B Black Omnidirectional Replacement Cartridge
Omnidirectional cartridge for all Microflex MX183, MX202, MX391, MX392, MX393, MX412, MX418 and WL183 microphones.
Cardioid Cartridge, Black.
Shure R185B Cardioid Cartridge, Black.
Cardioid cartridge for all Microflex MX183, MX202, MX391, MX392, MX393, MX412, MX418 microphones.
Supercardioid Cartridge, Black.
Shure R184B Supercardioid Cartridge, Black.
Supercardioid cartridge for WL183, WL184, WL185 and all Microflex MX183, MX202, MX391, MX392, MX393, MX412, MX418 Microphones. 
Snap-fit windscreen (4-pack)
Shure RK183WS Snap-fit windscreen (4-pack)
Black snap-fit foam windscreen for Beta 98, MX180, MX183, MX184, MX185, MX202 series, WH30, WL183, WL184, WL185. (Contains four).
Desktop/Tabletop Stand for MX202 Overhead Microphone
Shure A202BB Desktop/Tabletop Stand for MX202 Overhead Microphone
Shure's A202BB desktop stand is designed for use with their MX202 overhead microphone on a flat horizontal surface.NOTE: The MX202 overhead microphone shown attached to the desktop stand in the picture above does NOT come with ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Hang Clip for MX202B/S
Shure 80B489 Hang Clip for MX202B/S
Hang clip for the Shure MX202B/S super-cardioid hanging condenser microphone.
Usually ships in 7-14 business days.
Need it sooner? Call us!

Shure MX202BP/C
Microflex Cardioid Mini-Condenser Overhead Microphone with Plate Mount Preamplifier

OUR PART #  MX202BP/C

Product Information:

The Shure MX202BP/C Microflex Overhead cardioid condenser microphone captures Shure-quality sound in an adjustable compact package. The MX202BP/C features a flexible 4" gooseneck, a plate-mounted preamplifier, and a 30 foot cable.

When combined with the high-sensitivity cartridge's wide frequency response, this microphone provides accurate sound reproduction with a minimum of RF interference or electromagnetic hum. The MX202BP/C works with interchangeable cardioid (included ), supercardioid and omnidirectional condenser cartridges, which fit every model in the Microflex product line for enhanced convenience and consistent sound.

Shure MX202BP/C Features:

  • Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
  • Interchangeable cartridges that provide an optimal polar pattern choice for each application
  • Balanced, transformerless output for increased immunity to noise over long cable runs

Shure MX202BP/C Specifications:

  • Frequency Response: 50 Hz to 17 kHz
  • Polar Pattern: Cardioid
  • Output Impedance: EIA Rated at 150 ohms (180 ohms actual)
  • Maximum SPL (1 kHz at 1% THD, 1 kohm load): 124.2 dB
    • Sensitivity (At 1,000 Hz, open circuit voltage): –35.0 dBV/Pa (17.8 mV)
  • Equivalent Output Noise (A-weighted): 28.0 dB SPL
  • Signal to Noise Ratio (referenced at 94 dB SPL): 66.0dB
  • Dynamic Range at 1 kohm Load: 96.2 dB
  • Common Mode Rejection: 45.0 dB minimum
  • Preamplifier Output Clipping Level (1% THD): –6.0 dBV(0.5 V)
  • Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
  • Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
  • Environmental Requirements
    • Operating Temperature Range: –18° C to 57° C (0° F to 135° F)
    • Relative Humidity: 0 to 95%
Black Omnidirectional Replacement Cartridge
Shure R183B Black Omnidirectional Replacement Cartridge
Omnidirectional cartridge for all Microflex MX183, MX202, MX391, MX392, MX393, MX412, MX418 and WL183 microphones.
Cardioid Cartridge, Black.
Shure R185B Cardioid Cartridge, Black.
Cardioid cartridge for all Microflex MX183, MX202, MX391, MX392, MX393, MX412, MX418 microphones.
Supercardioid Cartridge, Black.
Shure R184B Supercardioid Cartridge, Black.
Supercardioid cartridge for WL183, WL184, WL185 and all Microflex MX183, MX202, MX391, MX392, MX393, MX412, MX418 Microphones. 
Snap-fit windscreen (4-pack)
Shure RK183WS Snap-fit windscreen (4-pack)
Black snap-fit foam windscreen for Beta 98, MX180, MX183, MX184, MX185, MX202 series, WH30, WL183, WL184, WL185. (Contains four).
Desktop/Tabletop Stand for MX202 Overhead Microphone
Shure A202BB Desktop/Tabletop Stand for MX202 Overhead Microphone
Shure's A202BB desktop stand is designed for use with their MX202 overhead microphone on a flat horizontal surface.NOTE: The MX202 overhead microphone shown attached to the desktop stand in the picture above does NOT come with ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Hang Clip for MX202B/S
Shure 80B489 Hang Clip for MX202B/S
Hang clip for the Shure MX202B/S super-cardioid hanging condenser microphone.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

HACKER SAFE certified sites prevent over 99.9% of hacker crime.