Neutrik NCJ6FI-S
Combo 1/4" Stereo + 3-pin XLR Female Receptacle, Solder Cups

OUR PART #  NCJ6FI-S


The Neutrik NCJ6FI-S is a 3 pole XLR female receptacle with 1/4" stereo jack without normalling. With solder cups for wire termination.

Combined XLR receptacle and phone jack. New attractive `front end` design (30% less protruding from panel than original). Saves racks space by combining 2 connectors in one housing. Horizontal or vertical PCB mounting or hard wire soldering. Full normalled. Stereo or mono version. Very low conductor capacitance, therefore suitable for Digital Audio. Fully compatible to the predecessor Combo. Fastening: Self-tapping PT® screws with thread 2.9x1.06 and tri-rondular configuration.

Neutrik NCJ6FI-S Specifications:

  • Electrical Specifications:
    • Contact resistance: XLR: < 10 m ohm
    • Jack: < 20 m ohm
    • Rated current: 7.5 A
    • Rated voltage: 50 V ac
    • Insulation resistance: > 500 M ohm after damp heat test
    • Dielectric strength: 1500 V dc
    • Capacitance: < 2 pF
  • Mechanical Specifications:
    • Engagement / separation force: XLR: < 25 N / > 15 N
    • Jack: < 25 N / 15 - 25 N
    • Solderability: complies with IEC 68-2-20
    • Applicable Standard: EIA RS-453 for jack
  • Material Specifications:
    • Shell: Polyamid, PA 6.6 30% GR
    • Contacts of Jack and XLR: CuSn6
    • Contact plating: XLR and switch contacts: galv. Au Jack and Ground: galv.Ag
    • Temperature range: -20°C to +65°C

Neutrik NCJ6FI-S
Combo 1/4" Stereo + 3-pin XLR Female Receptacle, Solder Cups

OUR PART #  NCJ6FI-S

Product Information:

The Neutrik NCJ6FI-S is a 3 pole XLR female receptacle with 1/4" stereo jack without normalling. With solder cups for wire termination.

Combined XLR receptacle and phone jack. New attractive `front end` design (30% less protruding from panel than original). Saves racks space by combining 2 connectors in one housing. Horizontal or vertical PCB mounting or hard wire soldering. Full normalled. Stereo or mono version. Very low conductor capacitance, therefore suitable for Digital Audio. Fully compatible to the predecessor Combo. Fastening: Self-tapping PT® screws with thread 2.9x1.06 and tri-rondular configuration.

Neutrik NCJ6FI-S Specifications:

  • Electrical Specifications:
    • Contact resistance: XLR: < 10 m ohm
    • Jack: < 20 m ohm
    • Rated current: 7.5 A
    • Rated voltage: 50 V ac
    • Insulation resistance: > 500 M ohm after damp heat test
    • Dielectric strength: 1500 V dc
    • Capacitance: < 2 pF
  • Mechanical Specifications:
    • Engagement / separation force: XLR: < 25 N / > 15 N
    • Jack: < 25 N / 15 - 25 N
    • Solderability: complies with IEC 68-2-20
    • Applicable Standard: EIA RS-453 for jack
  • Material Specifications:
    • Shell: Polyamid, PA 6.6 30% GR
    • Contacts of Jack and XLR: CuSn6
    • Contact plating: XLR and switch contacts: galv. Au Jack and Ground: galv.Ag
    • Temperature range: -20°C to +65°C
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM