Burst Electronics VDA4YC
1x4 S-Video Distribution Amplifier

OUR PART #  VDA4YC


The four output VDA-4YC is a compact unit featuring a looping input. A wide bandwidth of 33 MHz assures clean video, Small enough to fit most anywhere but with no sacrifice in performance. Gain is adjustable plus or minus 3 dB. There is an internal jumper to select 75 Ohm termination, no need for an external terminator. Enclosure that can be for either table top use or rack mounted using the optional RM-4.

Specifications:

  • Input: 1 volt standard video
  • Input Impedance: Hi-Z or 751/2, looping (jumper selected)
  • Coupling: DC throughout
  • Internal Power: Plus & Minus 5 Vdc derived from ext.12 Volt
  • Outputs: Four, 751/2
  • Output Voltage: 4 Vpp max
  • Delay Input to Output: 10 nS
  • Output Impedance: 751/2 1%
  • Frequency Response: DC - 33MHz 0.2dB
  • Gain: Unity, adjustable plus/minus 3dB
  • Diff.Gain: 0.1%
  • Diff.Phase: 0.1 degrees
  • Video Connector: 4-pin mini DIN
  • Output Protection: Open or Short, infinite duration
  • Power: 120VAC 60Hz, 3 Watts, UL Listed Wall Module (incl.)
  • DC Powered: 10-16 Vdc (polarity insensitive), 150 mAdc
  • Size (Micro DA): 4.4W x 2.4H x 1.3D inches
  • Size (VDA-4): 4.2W x 1.5H x 5.5D inches
  • Rack Mount: Optional, Model RM-4

Burst Electronics VDA4YC
1x4 S-Video Distribution Amplifier

OUR PART #  VDA4YC

Product Information:

The four output VDA-4YC is a compact unit featuring a looping input. A wide bandwidth of 33 MHz assures clean video, Small enough to fit most anywhere but with no sacrifice in performance. Gain is adjustable plus or minus 3 dB. There is an internal jumper to select 75 Ohm termination, no need for an external terminator. Enclosure that can be for either table top use or rack mounted using the optional RM-4.

Specifications:

  • Input: 1 volt standard video
  • Input Impedance: Hi-Z or 751/2, looping (jumper selected)
  • Coupling: DC throughout
  • Internal Power: Plus & Minus 5 Vdc derived from ext.12 Volt
  • Outputs: Four, 751/2
  • Output Voltage: 4 Vpp max
  • Delay Input to Output: 10 nS
  • Output Impedance: 751/2 1%
  • Frequency Response: DC - 33MHz 0.2dB
  • Gain: Unity, adjustable plus/minus 3dB
  • Diff.Gain: 0.1%
  • Diff.Phase: 0.1 degrees
  • Video Connector: 4-pin mini DIN
  • Output Protection: Open or Short, infinite duration
  • Power: 120VAC 60Hz, 3 Watts, UL Listed Wall Module (incl.)
  • DC Powered: 10-16 Vdc (polarity insensitive), 150 mAdc
  • Size (Micro DA): 4.4W x 2.4H x 1.3D inches
  • Size (VDA-4): 4.2W x 1.5H x 5.5D inches
  • Rack Mount: Optional, Model RM-4
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM