Telex US2002
Multichannel Audiocom User Station

OUR PART #  US2002


The US-2002 is a simple, multichannel user station. It provides you with talk, listen, and call capabilities. Combine the US-2002 with different types of power supplies (PS2001L or PS4001) to create various Master Station configurations. The US-2002 can operate in an unbalanced mode to make it completely Clear-Com® compatible.

Telex US2002 Features:

  • Speaker Station or Headset Station
    • Use the built-in speaker for listening and add an optional Telex MCP-90 series Gooseneck Panel Microphone for talk-back. Or, turn off the speaker volume, and plug in any of a variety of Telex headsets for private communication.
  • Voice Activated Microphone (VOX)
    • Separate controls adjust the voice activation level for the headset microphone and panel microphone inputs.
  • Public Address (PA) Output, with PA key
    • Use your intercom microphone to talk over a PA system.
  • Back-lit Keys
    • Improves visibility in low-light.
  • Incoming Call Indications
    • Red flashing call light, with beep tone if desired.
  • Mic Kill Key
    • You can turn off all microphones on a channel to quickly clear the channel.
  • Program Input for Each Channel
    • Connect any line-level audio source for monitoring in the speaker or headset, or for routing to the intercom channel. The program audio to the channel can be set to interrupt while the US2002 operator is talking on the channel.
  • Expandable
    • Add more channels by connecting optional ES4000A Expansion Stations. Each ES4000A adds four additional channels (up to eighteen channels)
  • Clear-Com® Compatible

Telex US2002 Specifications:

  • Power Requirement
    • Phantom Power: 24 VDC nominal
    • Local Power: 12 to 15 VDC, 65 to 150 mA
    • Requires PS2001L or PS4001 power supply
  • Dimensions (H x W x D): 1.75" x 8.25" x 10.31" (44.5x 209.5 x 261.9 mm)
  • Weight: approx. 2 lbs (0.9 kg)
  • Environmental Requirements
    • Storage: -20° to 80° C; 0-95% humidity, non-condensing
    • Operating: -15° to 60° C; 0-95% humidity, non-condensing
  • Dynamic-mic Headset
    • Microphone: 50 to 200 ohm, dynamic (balanced or unbalanced)
    • Headphones: 150 to 600 ohm, monaural
    • Connector Type: XLR-4M
      • Pin 1: Microphone low
      • Pin 2: Microphone high
      • Pin 3: Headphone high
      • Pin 4: Headphone low
  • Panel Microphone or Electret-mic Headset
    • Microphone: 5k ohm, electret (-57 dB)
    • Headphones: 150 to 600 ohm, monaural
    • Connector Type: MCP-90, stereo plug with threaded shaft connector
  • Program Input
    • Input Level: 100mV maximum
    • Voltage Gain: 25 +/-3dB
    • Output Level: 1.0 Vrms nominal, 2.3 Vrms maximum
    • Input Impedance: 75k ohms
    • Common Mode Rejection: Greater than 50 dB
    • Connector type: DB9F
      • Pin 1: Ground
      • Pin 2: Program 1 input low
      • Pin 3: Program 2 input low
      • Pin 4: NC
      • Pin 5: NC
      • Pin 6: Program 1 input high
      • Pin 7: Program 2 input high
      • Pin 8: NC
      • Pin 9: NC
  • Intercom Channels, Balanced Mode (SW2 set to BALposition)
    • Output Level: 1 Vrms nominal
    • Input Impedance: 300 ohms
    • Bridging Impedance: Greater than 10,000 ohms
    • Sidetone: -40 dB, 35 dB adjustable range
    • Call Signaling
      • Send: 20 kHz +/-100 Hz, 0/5 Vrms +/-10%
      • Receive: 20 kHz +/-800 Hz, 100 mVrms
    • Mic-Kill Frequency
      • Send: 24 kHz +/-300 Hz, 0.5 Vrms +/-10%
      • Detect: 24 kHz +/-800 Hz, 100 mVrms
    • Common Mode Rejection Ratio: Greater than 50 dB
    • Connector Type: One XLR-3M and XLR-3F pair, wired in parallel, for each channel
      • Pin 1: Common
      • Pin 2: +30 VDC input
      • Pin 3: Intercom audio high
  • PA Output
    • Output Level: 235 mVrms nominal
    • Connector Type: 1/8" Stereo Phone Jack
      • Tip: PA output high
      • Ring: Not used
      • Sleeve: Common
  • Speaker Output
    • Output Level: 0 dB nominal (1.0 Vrms max)
    • Output Impedance: 1000 ohms nominal
    • Frequency Response: 200 Hz to 8 kHz +1/-3dB
    • Connector Type: RCA Phono Jack
      • Tip: Speaker output high
      • Sleeve: Common
  • Expansion Input/Output
    • Type: 0 dB nominal (1.0 Vrms max)
      • Tip: Talk output
      • Ring: Listen input
      • Sleeve: Common
  • External Power
    • Type: 2.0 mm power jack
      • Internal pin: positive (+)
      • External shell: negative (-)
  • Headphone Amplifier
    • Voltage Gain: 30 +/-3dB
    • Maximum Output: 250 mW +/-10% into 150 ohms, 65 mW +/-10% into 600 ohms
    • Frequency Response: 200 Hz to 8 kHz +1/-3 dB
    • Incoming Call Beep Tone: 2 kHz, at the headphones
    • Total Harmonic Distortion: less than 0.2% at 200 mW
    • Sidetone: 18 +/-2 dB, adjustable
  • Panel Microphone Amplifier
    • Voltage Gain
      • Mic to CHN: 25 +/-3dB, before limiting
      • Mic to Headphone: adjustable, 45 dB +/-10% maximum, into 150 ohms
      • Mic to PA: 15 +/-3dB, 235 mVrms +/-10%
    • Frequency Response: 200 Hz to 8 kHz +1/-3dB
    • Total Harmonic Distortion: less than 0.2% at CHN output
    • VOX Range: -75 to -30 dB, -60 dB factory set
2-channel Audiocom Power Supply
Telex PS2001L 2-channel Audiocom Power Supply
The Telex PS2001L power supply supplies two isolated channels of intercom system phantom power to down line components. Intercom power channels may be combined via the Combine/Isolate switch to form a single intercom power channel ...
Dual-sided Medium-weight Passive Noise Reduction Headset, A4F Connector
Telex HR2-300534-000 Dual-sided Medium-weight Passive Noise Reduction Headset, A4F Connector
The Telex HR-2 is a dual-sided, medium-weight passive noise reduction headset with dynamic noise canceling microphone. the headset has a noise reduction rating of 21 dB; suitable for use in a moderately noisy environment. The ergonomic ...
Single-sided Passive Noise Reduction Headset, A4F Connector
Telex HR1-300534-007 Single-sided Passive Noise Reduction Headset, A4F Connector
The HR-1 is a single muff, medium-weight passive noise reduction headset with dynamic noise canceling microphone. the headset has a noise reduction rating of 21 dB; suitable for use in a moderately noisy environment. The ergonomic ...
Single-sided Medium weight Headset, A4F Connector
Telex PH1 Single-sided Medium weight Headset, A4F Connector
Medium-weight single muff headset with foam filled cushions offers a light feel with moderate isolation from ambient noise. Dynamic noise canceling mic is easily positioned with unique continuously adjustable ball joint.
Single-sided Lightweight Headset, A4F Connector, PH-88
Telex PH88 Single-sided Lightweight Headset, A4F Connector, PH-88
Super light-weight single muff headset with dynamic noise canceling microphone. Semi-rigid, fully adjustable gooseneck mic boom for precise positioning. High quality wide band earphones with moleskin covering for better fit, isolation and ...
Single Rack Mount
Telex RMK-S Single Rack Mount
Single rackmount kit for US-2002, ES-4000A, PS-4001, PS-2001L or SPS-2001 in center of 19" rack.
4 Ch Power Supply
Telex PS40001 4 Ch Power Supply
4 channel, 2 amp power supply. The power supply, whether it be a discrete component or integrated into a master station provides system power for down-line components such as beltpacks and speaker stations. All Audiocom® power supplies ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
4 Ch Expander Station, No Power Supply
Telex ES4000A-90007551-000 4 Ch Expander Station, No Power Supply
Expander station for the US2002, up to 4 ES-4000A expansion stations may be connected to the US-2002 (via 1/8" rear data connector) to add up to 16 channels (18 channels total). The ES-4000A typically utilizes the US-2002 microphone & ...

Please call for availability.
2-channel Audiocom Power Supply with Speaker
Telex SPS2001 2-channel Audiocom Power Supply with Speaker
The SPS2001 has all of the features of the PS2001 but adds the power of a built-in speaker and level control for monitoring intercom lines. The SPS2001 may be used as a stand-alone power supply and monitor box or in combination with a ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Speaker Self-Powered 5w
Telex SPK2000 Speaker Self-Powered 5w
Self-powered rackmount speaker with 5 watt output. 1/2 rack wide by 1 high. For the US-2002 and ES-4001A stations. Accepts 2 channels of intercom audio or combined mono intercom and local audio program source feeds.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Dual-sided Mediumweight Headset, A4F Connector
Telex PH2-64437-100 Dual-sided Mediumweight Headset, A4F Connector
The PH-2 and PH-2R is a medium-weight dual muff mono headset with foam filled cushions offers a light feel with moderate isolation from ambient noise. Dynamic noise canceling mic is easily positioned with unique continuously adjustable ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Single Headset Flexible Boom Mic
Telex PH88E-300852-203 Single Headset Flexible Boom Mic
Lightweight, single-sided headset with a flexible dynamic boom microphone. 150 ohm earphone with a 12 ft (3.6m) coiled cord and an A4F connector.

Usually ships in 7-14 business days.
Need it sooner? Call us!
9pin Male Program Input
Telex XP-USPG 9pin Male Program Input
9-pin male program input on US-2002 and MS-2002 into two XLR-3 male plus 1/8" stereo PA output into a XLR-3 male breakout device(1/4 rack wide).

Usually ships in 7-14 business days.
Need it sooner? Call us!

Telex US2002
Multichannel Audiocom User Station

OUR PART #  US2002

Product Information:

The US-2002 is a simple, multichannel user station. It provides you with talk, listen, and call capabilities. Combine the US-2002 with different types of power supplies (PS2001L or PS4001) to create various Master Station configurations. The US-2002 can operate in an unbalanced mode to make it completely Clear-Com® compatible.

Telex US2002 Features:

  • Speaker Station or Headset Station
    • Use the built-in speaker for listening and add an optional Telex MCP-90 series Gooseneck Panel Microphone for talk-back. Or, turn off the speaker volume, and plug in any of a variety of Telex headsets for private communication.
  • Voice Activated Microphone (VOX)
    • Separate controls adjust the voice activation level for the headset microphone and panel microphone inputs.
  • Public Address (PA) Output, with PA key
    • Use your intercom microphone to talk over a PA system.
  • Back-lit Keys
    • Improves visibility in low-light.
  • Incoming Call Indications
    • Red flashing call light, with beep tone if desired.
  • Mic Kill Key
    • You can turn off all microphones on a channel to quickly clear the channel.
  • Program Input for Each Channel
    • Connect any line-level audio source for monitoring in the speaker or headset, or for routing to the intercom channel. The program audio to the channel can be set to interrupt while the US2002 operator is talking on the channel.
  • Expandable
    • Add more channels by connecting optional ES4000A Expansion Stations. Each ES4000A adds four additional channels (up to eighteen channels)
  • Clear-Com® Compatible

Telex US2002 Specifications:

  • Power Requirement
    • Phantom Power: 24 VDC nominal
    • Local Power: 12 to 15 VDC, 65 to 150 mA
    • Requires PS2001L or PS4001 power supply
  • Dimensions (H x W x D): 1.75" x 8.25" x 10.31" (44.5x 209.5 x 261.9 mm)
  • Weight: approx. 2 lbs (0.9 kg)
  • Environmental Requirements
    • Storage: -20° to 80° C; 0-95% humidity, non-condensing
    • Operating: -15° to 60° C; 0-95% humidity, non-condensing
  • Dynamic-mic Headset
    • Microphone: 50 to 200 ohm, dynamic (balanced or unbalanced)
    • Headphones: 150 to 600 ohm, monaural
    • Connector Type: XLR-4M
      • Pin 1: Microphone low
      • Pin 2: Microphone high
      • Pin 3: Headphone high
      • Pin 4: Headphone low
  • Panel Microphone or Electret-mic Headset
    • Microphone: 5k ohm, electret (-57 dB)
    • Headphones: 150 to 600 ohm, monaural
    • Connector Type: MCP-90, stereo plug with threaded shaft connector
  • Program Input
    • Input Level: 100mV maximum
    • Voltage Gain: 25 +/-3dB
    • Output Level: 1.0 Vrms nominal, 2.3 Vrms maximum
    • Input Impedance: 75k ohms
    • Common Mode Rejection: Greater than 50 dB
    • Connector type: DB9F
      • Pin 1: Ground
      • Pin 2: Program 1 input low
      • Pin 3: Program 2 input low
      • Pin 4: NC
      • Pin 5: NC
      • Pin 6: Program 1 input high
      • Pin 7: Program 2 input high
      • Pin 8: NC
      • Pin 9: NC
  • Intercom Channels, Balanced Mode (SW2 set to BALposition)
    • Output Level: 1 Vrms nominal
    • Input Impedance: 300 ohms
    • Bridging Impedance: Greater than 10,000 ohms
    • Sidetone: -40 dB, 35 dB adjustable range
    • Call Signaling
      • Send: 20 kHz +/-100 Hz, 0/5 Vrms +/-10%
      • Receive: 20 kHz +/-800 Hz, 100 mVrms
    • Mic-Kill Frequency
      • Send: 24 kHz +/-300 Hz, 0.5 Vrms +/-10%
      • Detect: 24 kHz +/-800 Hz, 100 mVrms
    • Common Mode Rejection Ratio: Greater than 50 dB
    • Connector Type: One XLR-3M and XLR-3F pair, wired in parallel, for each channel
      • Pin 1: Common
      • Pin 2: +30 VDC input
      • Pin 3: Intercom audio high
  • PA Output
    • Output Level: 235 mVrms nominal
    • Connector Type: 1/8" Stereo Phone Jack
      • Tip: PA output high
      • Ring: Not used
      • Sleeve: Common
  • Speaker Output
    • Output Level: 0 dB nominal (1.0 Vrms max)
    • Output Impedance: 1000 ohms nominal
    • Frequency Response: 200 Hz to 8 kHz +1/-3dB
    • Connector Type: RCA Phono Jack
      • Tip: Speaker output high
      • Sleeve: Common
  • Expansion Input/Output
    • Type: 0 dB nominal (1.0 Vrms max)
      • Tip: Talk output
      • Ring: Listen input
      • Sleeve: Common
  • External Power
    • Type: 2.0 mm power jack
      • Internal pin: positive (+)
      • External shell: negative (-)
  • Headphone Amplifier
    • Voltage Gain: 30 +/-3dB
    • Maximum Output: 250 mW +/-10% into 150 ohms, 65 mW +/-10% into 600 ohms
    • Frequency Response: 200 Hz to 8 kHz +1/-3 dB
    • Incoming Call Beep Tone: 2 kHz, at the headphones
    • Total Harmonic Distortion: less than 0.2% at 200 mW
    • Sidetone: 18 +/-2 dB, adjustable
  • Panel Microphone Amplifier
    • Voltage Gain
      • Mic to CHN: 25 +/-3dB, before limiting
      • Mic to Headphone: adjustable, 45 dB +/-10% maximum, into 150 ohms
      • Mic to PA: 15 +/-3dB, 235 mVrms +/-10%
    • Frequency Response: 200 Hz to 8 kHz +1/-3dB
    • Total Harmonic Distortion: less than 0.2% at CHN output
    • VOX Range: -75 to -30 dB, -60 dB factory set
2-channel Audiocom Power Supply
Telex PS2001L 2-channel Audiocom Power Supply
The Telex PS2001L power supply supplies two isolated channels of intercom system phantom power to down line components. Intercom power channels may be combined via the Combine/Isolate switch to form a single intercom power channel ...
Dual-sided Medium-weight Passive Noise Reduction Headset, A4F Connector
Telex HR2-300534-000 Dual-sided Medium-weight Passive Noise Reduction Headset, A4F Connector
The Telex HR-2 is a dual-sided, medium-weight passive noise reduction headset with dynamic noise canceling microphone. the headset has a noise reduction rating of 21 dB; suitable for use in a moderately noisy environment. The ergonomic ...
Single-sided Passive Noise Reduction Headset, A4F Connector
Telex HR1-300534-007 Single-sided Passive Noise Reduction Headset, A4F Connector
The HR-1 is a single muff, medium-weight passive noise reduction headset with dynamic noise canceling microphone. the headset has a noise reduction rating of 21 dB; suitable for use in a moderately noisy environment. The ergonomic ...
Single-sided Medium weight Headset, A4F Connector
Telex PH1 Single-sided Medium weight Headset, A4F Connector
Medium-weight single muff headset with foam filled cushions offers a light feel with moderate isolation from ambient noise. Dynamic noise canceling mic is easily positioned with unique continuously adjustable ball joint.
Single-sided Lightweight Headset, A4F Connector, PH-88
Telex PH88 Single-sided Lightweight Headset, A4F Connector, PH-88
Super light-weight single muff headset with dynamic noise canceling microphone. Semi-rigid, fully adjustable gooseneck mic boom for precise positioning. High quality wide band earphones with moleskin covering for better fit, isolation and ...
Single Rack Mount
Telex RMK-S Single Rack Mount
Single rackmount kit for US-2002, ES-4000A, PS-4001, PS-2001L or SPS-2001 in center of 19" rack.
4 Ch Power Supply
Telex PS40001 4 Ch Power Supply
4 channel, 2 amp power supply. The power supply, whether it be a discrete component or integrated into a master station provides system power for down-line components such as beltpacks and speaker stations. All Audiocom® power supplies ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
4 Ch Expander Station, No Power Supply
Telex ES4000A-90007551-000 4 Ch Expander Station, No Power Supply
Expander station for the US2002, up to 4 ES-4000A expansion stations may be connected to the US-2002 (via 1/8" rear data connector) to add up to 16 channels (18 channels total). The ES-4000A typically utilizes the US-2002 microphone & ...

Please call for availability.
2-channel Audiocom Power Supply with Speaker
Telex SPS2001 2-channel Audiocom Power Supply with Speaker
The SPS2001 has all of the features of the PS2001 but adds the power of a built-in speaker and level control for monitoring intercom lines. The SPS2001 may be used as a stand-alone power supply and monitor box or in combination with a ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Speaker Self-Powered 5w
Telex SPK2000 Speaker Self-Powered 5w
Self-powered rackmount speaker with 5 watt output. 1/2 rack wide by 1 high. For the US-2002 and ES-4001A stations. Accepts 2 channels of intercom audio or combined mono intercom and local audio program source feeds.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Dual-sided Mediumweight Headset, A4F Connector
Telex PH2-64437-100 Dual-sided Mediumweight Headset, A4F Connector
The PH-2 and PH-2R is a medium-weight dual muff mono headset with foam filled cushions offers a light feel with moderate isolation from ambient noise. Dynamic noise canceling mic is easily positioned with unique continuously adjustable ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Single Headset Flexible Boom Mic
Telex PH88E-300852-203 Single Headset Flexible Boom Mic
Lightweight, single-sided headset with a flexible dynamic boom microphone. 150 ohm earphone with a 12 ft (3.6m) coiled cord and an A4F connector.

Usually ships in 7-14 business days.
Need it sooner? Call us!
9pin Male Program Input
Telex XP-USPG 9pin Male Program Input
9-pin male program input on US-2002 and MS-2002 into two XLR-3 male plus 1/8" stereo PA output into a XLR-3 male breakout device(1/4 rack wide).

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM