Audio-Technica AT4041
Cardioid Studio Electret Condenser Microphone

OUR PART #  AT4041


The Audio-Technica AT4041 is a premium electret condenser microphone that is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. The AT4041 cardioid studio condenser microphone features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability. A unique combination of audio excellence and moderate cost, the AT4041 is a rugged microphone housed in a case of turned brass with black chrome plating for durability and low reflectivity. The element back plate holds a fixed charge and has been aged to provide energy stabilization. The surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion.

Audio-Technica AT4041 Features:

  • Smooth, extended frequency response with a slight rise occurring in the high-frequency region
  • Ideal for drum overheads, acoustic guitar, piano, horns and under snare
  • Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
  • Switchable hi-pass filter and rugged turned-brass microphone housing
  • Custom shock mount provides superior isolation

Audio-Technica AT4041 Specifications:

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 20-20,000 Hz
  • Low Frequency Roll-Off: 80 Hz, 12 dB/octave
  • Open Circuit Sensitivity: -36dB (15.8 mV) re 1V at 1 Pa
  • Impedance: 100 ohms
  • Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamice Range (Typical): 121 dB, 1 kHz at Max SPL
  • Signal-to-Noise Ratio: 70 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 48V DC, 3.2 mA typical
  • Switches: Flat, roll-off
  • Weight: 4.2 oz
  • Dimensions: 6.28" long, 0.83" body diameter
  • Output Connector: Integral 3-pin XLRM-type
  • Accessories Furnished: AT8405a shock mount for 5/8"-27 threaded stands; AT8159 windscreen; soft protective pouch
Universal Microphone Shockmount
Audio-Technica AT8410A Universal Microphone Shockmount
The Audio-Technica AT8410A shock mount is useful for isolating your microphone from vibrations that can travel up the mic stand and later appear as various strange noises or low end rumbling on your tracks.Audio-Technica AT8410A ...
Isolation Clamp
Audio-Technica AT8471 Isolation Clamp
Microphone isolation clamp that provides effective reduction of stand-transmitted noise. Dependably maintains positioning while securely holding microphone and compatible with 5/8"-27 threaded stands.Fits Audio-Technica Case Style(s): R1, ...
Windscreen for AT4041
Audio-Technica AT8159 Windscreen for AT4041
Small egg-shaped foam windscreen for the AT 4000 Series, AT 3031 and AT 3032 microphones.
Microphone Windscreen, 3/4" Inside Diameter (Black)
WindTech 1200-Black Microphone Windscreen, 3/4" Inside Diameter (Black)
Since 1976, WindTech has manufactured the highest quality American made microphone windscreens on the market. They are available in  25  brilliant colors, and a wide variety of shapes and sizes to fit most popular microphones. ...
Low Profile Universal Shockmount
Audio-Technica AT8415 Low Profile Universal Shockmount
Low-profile universal shock mount with flexible bands. Attenuates noise, shock and vibration transmitted through mic stands, booms and mounts. Lightweight, low-profile design is ideal for "fishpole" booms and video use. Accepts cylindrical ...
Usually ships in 7-14 business days.
Need it sooner? Call us!

Audio-Technica AT4041
Cardioid Studio Electret Condenser Microphone

OUR PART #  AT4041

Product Information:

The Audio-Technica AT4041 is a premium electret condenser microphone that is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. The AT4041 cardioid studio condenser microphone features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability. A unique combination of audio excellence and moderate cost, the AT4041 is a rugged microphone housed in a case of turned brass with black chrome plating for durability and low reflectivity. The element back plate holds a fixed charge and has been aged to provide energy stabilization. The surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion.

Audio-Technica AT4041 Features:

  • Smooth, extended frequency response with a slight rise occurring in the high-frequency region
  • Ideal for drum overheads, acoustic guitar, piano, horns and under snare
  • Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
  • Switchable hi-pass filter and rugged turned-brass microphone housing
  • Custom shock mount provides superior isolation

Audio-Technica AT4041 Specifications:

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 20-20,000 Hz
  • Low Frequency Roll-Off: 80 Hz, 12 dB/octave
  • Open Circuit Sensitivity: -36dB (15.8 mV) re 1V at 1 Pa
  • Impedance: 100 ohms
  • Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamice Range (Typical): 121 dB, 1 kHz at Max SPL
  • Signal-to-Noise Ratio: 70 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 48V DC, 3.2 mA typical
  • Switches: Flat, roll-off
  • Weight: 4.2 oz
  • Dimensions: 6.28" long, 0.83" body diameter
  • Output Connector: Integral 3-pin XLRM-type
  • Accessories Furnished: AT8405a shock mount for 5/8"-27 threaded stands; AT8159 windscreen; soft protective pouch
Universal Microphone Shockmount
Audio-Technica AT8410A Universal Microphone Shockmount
The Audio-Technica AT8410A shock mount is useful for isolating your microphone from vibrations that can travel up the mic stand and later appear as various strange noises or low end rumbling on your tracks.Audio-Technica AT8410A ...
Isolation Clamp
Audio-Technica AT8471 Isolation Clamp
Microphone isolation clamp that provides effective reduction of stand-transmitted noise. Dependably maintains positioning while securely holding microphone and compatible with 5/8"-27 threaded stands.Fits Audio-Technica Case Style(s): R1, ...
Windscreen for AT4041
Audio-Technica AT8159 Windscreen for AT4041
Small egg-shaped foam windscreen for the AT 4000 Series, AT 3031 and AT 3032 microphones.
Microphone Windscreen, 3/4" Inside Diameter (Black)
WindTech 1200-Black Microphone Windscreen, 3/4" Inside Diameter (Black)
Since 1976, WindTech has manufactured the highest quality American made microphone windscreens on the market. They are available in  25  brilliant colors, and a wide variety of shapes and sizes to fit most popular microphones. ...
Low Profile Universal Shockmount
Audio-Technica AT8415 Low Profile Universal Shockmount
Low-profile universal shock mount with flexible bands. Attenuates noise, shock and vibration transmitted through mic stands, booms and mounts. Lightweight, low-profile design is ideal for "fishpole" booms and video use. Accepts cylindrical ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

HACKER SAFE certified sites prevent over 99.9% of hacker crime.