Electro-Voice RE90P-18
18" Gooseneck/Podium mic

OUR PART #  RE90P-18


The RE90P-18 is a podium microphone are phantom-powered “backelectret” miniature condenser gooseneck microphone. The back-electret feature provides greater sensitivity, wider frequency response, and superior immunity from handling noise than a diaphragm-electret microphone.

The RE90P-18 is mechanically designed for quick, easy mounting to a lectern, pulpit or podium equipped with a bulkhead female XLR-type 3-pin receptacle. For permanent installation, optional fixed (FMK flange-mount kit) and shock-mounted (CPSM shock-mount kit) accessories are also available. The RE90P-18 is designed for sound reinforcement applications. The frequency response is tailored for full-range sound reproduction with natural sound pick-up optimized for close-up use. The small-diameter gooseneck has two supple joints and a rigid center tube. The rigid tube prevents unsightly twisting of the gooseneck but permits the user to exactly position the microphone.

The electronics housing has a 3/4-inch diameter base terminated with an XLR-type 3-pin connector which allows the microphone to be plugged directly into an existing panel-mount XLR-type receptacle. The housing is machined steel for ruggedness and superior EMI/RFI attenuation. The electronics’ output circuit utilizes a transformerless balanced construction with a low-output impedance, which is typically 200 ohms. This permits very long cable runs without degrading the microphone performance. The RE90P-18 is designed to be phantom powered with a wide voltage range, 9-52 V dc (DIN Standard 45 596).

Features

  • Small size – unobtrusive for podium applications
  • Frequency and cardioid polar response uniform across the range, for natural sound and high resistance to feedback
  • All-metal construction substantially reduces noise from stray magnetic fields and RFI
  • Low, 200-ohm output allows long cable runs
  • Optional CPSM podium shock mount provides more than 15 dB of mechnical shock isolation at 200 Hz
    Specifications
    • Generating Element: Condenser, back electret
    • Frequency Response:
      • 100-15,000 Hz (5 in. or greater)
      • 70-15,000 Hz (3 in. distance)
    • Polar Pattern: Cardioid
    • Sensitivity, Open Circuit Voltage: 4.5 mV/pascal @ 1,000 Hz
    • Power Level: -43dB at 1,000 Hz (0 dB = 1 mW/pascal)
    • Dynamic Range: 102 dB
    • Equivalent Output Noise: <28 dB SPL “A” weighted (0 dB=20 micropascals)
    • Impedance: measured at 1,000 Hz (works with all low-Z mic inputs)
    • Power Requirements: 9-52 V dc phantom supply
    • Current Consumption: 2.5 mA
    • Polarity: A positive pressure on the diaphram produces a positive voltage on output pin 2(+)
    • Color: Nonreflecting black
    • Environmental Conditions
      • Relative Humidity 0-50%: –29° to 74° C (–20° to 165° F)
      • Relative Humidity 0-95%: –29° to 57° C (–20° to 135° F)
    • Net Weight: 182 grams (6.4 oz)
    • Shipping Weight: 400 grams (14.1 oz)
    • Mounting: Male XLR-type 3-pin connector
    • Dimensions
      • Gooseneck and Head Length: 280.7 mm (11.05 in.)
      • Maximum Head Diameter: 12.7 mm (0.50 in.)
      • Gooseneck Diameter: 6.4 mm (0.25 in.)
      • Electronics Module Diameter: 20 mm (0.79 in.)
      • Connector Diameter: 19 mm (0.75 in.)
    • Accessories Furnished: Windscreen, Double-sided tape
    Isolating Shockmount for CP212 and CP218 Gooseneck Microphones
    Electro-Voice CPSM Isolating Shockmount for CP212 and CP218 Gooseneck Microphones
    Electro-Voice's CPSM shockmount is a permanent mounting accessory providing shock isolation for the CP212 and CP218 podium microphones.  The amount of isolation is substantial, in excess of 15 dB at 200 Hz.  The CPSM is also ...

    Usually ships in 7-14 business days.
    Need it sooner? Call us!

    Electro-Voice RE90P-18
    18" Gooseneck/Podium mic

    OUR PART #  RE90P-18

    Product Information:

    The RE90P-18 is a podium microphone are phantom-powered “backelectret” miniature condenser gooseneck microphone. The back-electret feature provides greater sensitivity, wider frequency response, and superior immunity from handling noise than a diaphragm-electret microphone.

    The RE90P-18 is mechanically designed for quick, easy mounting to a lectern, pulpit or podium equipped with a bulkhead female XLR-type 3-pin receptacle. For permanent installation, optional fixed (FMK flange-mount kit) and shock-mounted (CPSM shock-mount kit) accessories are also available. The RE90P-18 is designed for sound reinforcement applications. The frequency response is tailored for full-range sound reproduction with natural sound pick-up optimized for close-up use. The small-diameter gooseneck has two supple joints and a rigid center tube. The rigid tube prevents unsightly twisting of the gooseneck but permits the user to exactly position the microphone.

    The electronics housing has a 3/4-inch diameter base terminated with an XLR-type 3-pin connector which allows the microphone to be plugged directly into an existing panel-mount XLR-type receptacle. The housing is machined steel for ruggedness and superior EMI/RFI attenuation. The electronics’ output circuit utilizes a transformerless balanced construction with a low-output impedance, which is typically 200 ohms. This permits very long cable runs without degrading the microphone performance. The RE90P-18 is designed to be phantom powered with a wide voltage range, 9-52 V dc (DIN Standard 45 596).

    Features

    • Small size – unobtrusive for podium applications
    • Frequency and cardioid polar response uniform across the range, for natural sound and high resistance to feedback
    • All-metal construction substantially reduces noise from stray magnetic fields and RFI
    • Low, 200-ohm output allows long cable runs
    • Optional CPSM podium shock mount provides more than 15 dB of mechnical shock isolation at 200 Hz
      Specifications
      • Generating Element: Condenser, back electret
      • Frequency Response:
        • 100-15,000 Hz (5 in. or greater)
        • 70-15,000 Hz (3 in. distance)
      • Polar Pattern: Cardioid
      • Sensitivity, Open Circuit Voltage: 4.5 mV/pascal @ 1,000 Hz
      • Power Level: -43dB at 1,000 Hz (0 dB = 1 mW/pascal)
      • Dynamic Range: 102 dB
      • Equivalent Output Noise: <28 dB SPL “A” weighted (0 dB=20 micropascals)
      • Impedance: measured at 1,000 Hz (works with all low-Z mic inputs)
      • Power Requirements: 9-52 V dc phantom supply
      • Current Consumption: 2.5 mA
      • Polarity: A positive pressure on the diaphram produces a positive voltage on output pin 2(+)
      • Color: Nonreflecting black
      • Environmental Conditions
        • Relative Humidity 0-50%: –29° to 74° C (–20° to 165° F)
        • Relative Humidity 0-95%: –29° to 57° C (–20° to 135° F)
      • Net Weight: 182 grams (6.4 oz)
      • Shipping Weight: 400 grams (14.1 oz)
      • Mounting: Male XLR-type 3-pin connector
      • Dimensions
        • Gooseneck and Head Length: 280.7 mm (11.05 in.)
        • Maximum Head Diameter: 12.7 mm (0.50 in.)
        • Gooseneck Diameter: 6.4 mm (0.25 in.)
        • Electronics Module Diameter: 20 mm (0.79 in.)
        • Connector Diameter: 19 mm (0.75 in.)
      • Accessories Furnished: Windscreen, Double-sided tape
      Isolating Shockmount for CP212 and CP218 Gooseneck Microphones
      Electro-Voice CPSM Isolating Shockmount for CP212 and CP218 Gooseneck Microphones
      Electro-Voice's CPSM shockmount is a permanent mounting accessory providing shock isolation for the CP212 and CP218 podium microphones.  The amount of isolation is substantial, in excess of 15 dB at 200 Hz.  The CPSM is also ...

      Usually ships in 7-14 business days.
      Need it sooner? Call us!
      Add to Cart

      We're sorry, only of this item available



      Call a Sales Pro at for more information

      Serving Contractors, Dealers, and Installers Since 1977

      Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM