Audio-Technica AT4050
Large Diaphragm Multi-Pattern Condenser Microphone

OUR PART #  AT4050


Meet the studio condenser that captures every nuance. With three switchable polar patterns, the large-diaphragm Audio-Technica AT4050 exhibits a remarkable combination of qualities: high-SPL capability with transparent and airy uppers/mids complemented by rich low-end qualities. Its dual large diaphragms are gold-vaporized and aged for consistent, outstanding performance. A precision-machined, nickel-plated brass acoustic element baffle provides rock-solid element stability and exceptional sensitivity.

Ideal for studio use and live sound productions with vocals, piano, strings, drum overheads, guitar amps, and more.

Audio-Technica AT4050 Includes:

  • AT8449 shock mount for 5/8"-27 threaded stands
  • Microphone dust cover
  • Protective carrying case

Audio-Technica AT4050 Features:

  • Transparent uppers/mids balanced by rich low-end qualities combine with advanced acoustic engineering for extensive performance capabilities and highest quality
  • Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
  • The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics achieved remain constant over years of use
  • Three switchable polar patterns: omni, cardioid, figure-of-eight
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • State-of-the-art surface-mount electronics ensure compliance with A-T'sstringent consistency and reliability standards
  • Switchable 80 Hz hi-pass filter and 10 dB pad
  • Custom shock mount provides superior isolation

Audio-Technica AT4050 Specifications:

  • Element: Externally-polarized (DC bias) condenser
  • Polar Pattern: Cardioid, Omnidirectional, Figure-of-eight
  • Frequency Response: 20 Hz -18 kHz
  • Low Frequency Roll-Off: 80 Hz, 12 dB/octave
  • Open Circuit Sensitivity: -36dB (15.8 mV) re 1V at 1 Pa
  • Impedance: 100 ohms
  • Maximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL,with 10 dB pad (nominal)
  • Noise: 17 dB SPL
  • Dynamice Range (Typical): 132 dB, 1 kHz at Max SPL
  • Signal-to-Noise Ratio: 77 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 48V DC, 4.2 mA typical
  • Switches: Polar Selection; Flat, roll-off; 10 dB pad (nominal)
  • Weight: 18 oz.
  • Dimensions: 7.40" long, 2.10" maximum body diameter
  • Output Connector: Integral 3-pin XLRM-type
Microphone Windscreen, 1-7/8" Inside Diameter (Black)
WindTech 20/421-BLACK Microphone Windscreen, 1-7/8" Inside Diameter (Black)
Since 1976, WindTech has manufactured the highest quality American made microphone windscreens on the market. They are available in  25  brilliant colors, and a wide variety of shapes and sizes to fit most popular microphones. ...
Isolation Clamp
Audio-Technica AT8471 Isolation Clamp
Microphone isolation clamp that provides effective reduction of stand-transmitted noise. Dependably maintains positioning while securely holding microphone and compatible with 5/8"-27 threaded stands.Fits Audio-Technica Case Style(s): R1, ...
Microphone Shock-Mount for AT4040/4047/4050
Audio-Technica AT8449 Microphone Shock-Mount for AT4040/4047/4050
Shockmount designed for Audio Technica AT4040 / AT4047 / AT4050 microphones.Features: Designed for use with the AT4050, AT4040, AT4033, AT4047 microphones Attenuates noise, shock and vibration transmitted through mic stands, ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
LG Windscreen
Audio-Technica AT8137 LG Windscreen
LG Windscreen for AT4033 and 4050 microphones.

Usually ships in 7-14 business days.
Need it sooner? Call us!

Audio-Technica AT4050
Large Diaphragm Multi-Pattern Condenser Microphone

OUR PART #  AT4050

Product Information:

Meet the studio condenser that captures every nuance. With three switchable polar patterns, the large-diaphragm Audio-Technica AT4050 exhibits a remarkable combination of qualities: high-SPL capability with transparent and airy uppers/mids complemented by rich low-end qualities. Its dual large diaphragms are gold-vaporized and aged for consistent, outstanding performance. A precision-machined, nickel-plated brass acoustic element baffle provides rock-solid element stability and exceptional sensitivity.

Ideal for studio use and live sound productions with vocals, piano, strings, drum overheads, guitar amps, and more.

Audio-Technica AT4050 Includes:

  • AT8449 shock mount for 5/8"-27 threaded stands
  • Microphone dust cover
  • Protective carrying case

Audio-Technica AT4050 Features:

  • Transparent uppers/mids balanced by rich low-end qualities combine with advanced acoustic engineering for extensive performance capabilities and highest quality
  • Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
  • The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics achieved remain constant over years of use
  • Three switchable polar patterns: omni, cardioid, figure-of-eight
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • State-of-the-art surface-mount electronics ensure compliance with A-T'sstringent consistency and reliability standards
  • Switchable 80 Hz hi-pass filter and 10 dB pad
  • Custom shock mount provides superior isolation

Audio-Technica AT4050 Specifications:

  • Element: Externally-polarized (DC bias) condenser
  • Polar Pattern: Cardioid, Omnidirectional, Figure-of-eight
  • Frequency Response: 20 Hz -18 kHz
  • Low Frequency Roll-Off: 80 Hz, 12 dB/octave
  • Open Circuit Sensitivity: -36dB (15.8 mV) re 1V at 1 Pa
  • Impedance: 100 ohms
  • Maximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL,with 10 dB pad (nominal)
  • Noise: 17 dB SPL
  • Dynamice Range (Typical): 132 dB, 1 kHz at Max SPL
  • Signal-to-Noise Ratio: 77 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 48V DC, 4.2 mA typical
  • Switches: Polar Selection; Flat, roll-off; 10 dB pad (nominal)
  • Weight: 18 oz.
  • Dimensions: 7.40" long, 2.10" maximum body diameter
  • Output Connector: Integral 3-pin XLRM-type
Microphone Windscreen, 1-7/8" Inside Diameter (Black)
WindTech 20/421-BLACK Microphone Windscreen, 1-7/8" Inside Diameter (Black)
Since 1976, WindTech has manufactured the highest quality American made microphone windscreens on the market. They are available in  25  brilliant colors, and a wide variety of shapes and sizes to fit most popular microphones. ...
Isolation Clamp
Audio-Technica AT8471 Isolation Clamp
Microphone isolation clamp that provides effective reduction of stand-transmitted noise. Dependably maintains positioning while securely holding microphone and compatible with 5/8"-27 threaded stands.Fits Audio-Technica Case Style(s): R1, ...
Microphone Shock-Mount for AT4040/4047/4050
Audio-Technica AT8449 Microphone Shock-Mount for AT4040/4047/4050
Shockmount designed for Audio Technica AT4040 / AT4047 / AT4050 microphones.Features: Designed for use with the AT4050, AT4040, AT4033, AT4047 microphones Attenuates noise, shock and vibration transmitted through mic stands, ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
LG Windscreen
Audio-Technica AT8137 LG Windscreen
LG Windscreen for AT4033 and 4050 microphones.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM