Shure 515SDX
Cardioid Dynamic, Handheld, High or Low Impedance (Plug Selectable), Locking On/Off Switch.

OUR PART #  515SDX


The Shure Model 515SDX is a dual-impedance, cardioid (unidirectional) dynamic microphone that is suitable for speech pickup in schools, churches, and meeting rooms. Its unidirectional polar pattern greatly reduces feedback.


The 515SDX includes a locking ON/OFF switch and an internal impedance selection socket mounted on the XLR connector for switching between high and low impedance. A slip-in swivel adapter is supplied for stand-mounted use.



Features
  • Rolled-off low-frequency response combined with a smooth high-frequency rise for clear and intelligible voice pickup
  • Symmetrical cardioid pickup pattern minimizes feedback
  • Neodymium magnet for high signal-to-noise ratio
  • Shock-mounted cartridge that minimizes handling noise
  • Lockable ON/OFF switch
  • Dual impedance selectable by internal socket
  • Slip-in swivel adapter for stand-mounted use
  • Three-pin professional audio connector, the industry standard, for maximum interchangeability of cables
  • Tough, die-cast grille resists wear from constant use and handling
  • Field serviceable and backed by the Shure 2-year warranty
Specifications
  • Type: Dynamic
  • Frequency Response: 80 to 15,000 Hz
  • Polar Pattern: Cardioid (unidirectional)
  • Impedance
    • LO Z: Microphone rating impedance is 150 ohms (270 ohms actual) for connection to inputs rated low impedance
    • HI Z: Microphone impedance is “High” for connections to high-impedance microphone inputs.
  • Output Level (at 1,000 Hz), Open Circuit Voltage:
    • LO Z: -56.0 dBV/Pa (1.6 mV)
    • HI Z: -37.5 dBV/Pa (14 mV)
  • Phasing: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 in both HI Z and LO Z modes
  • Switch: Built-in ON/OFF switch, lockplate to lock switch ON
  • Connector: Three-pin professional (male XLR) type
  • Cartridge Shock Mount: Internal rubber vibration-isolator
  • Swivel Adapter: Positive action, break-resistant, adjustable through 180 degrees, slip-out removal for handheld use, designed for mounting on stand with 5/8 in.–27 thread
  • Case: Platinum beige enamel die casting with platinum beige die-cast grille and stainless steel screen
  • Dimensions: 6.567" (167 mm) length, 1.5" (3.81 cm) head diameter
  • Net Weight: 11.1 oz (315 grams)
  • Furnished Accessory: Swivel Adapter
Replacement Microphone Stand Adapter
Shure A25DM Replacement Microphone Stand Adapter
10 pac of replacement microphone stand adapter for tapered barrel vocal microphones.
Microphone Isolation Mount
Shure A55M Microphone Isolation Mount
Shock Stopper isolation mount reduces transmission of mechanical noise and vibration by more than 20 decibels. Compatible with models SM57, SM58, Beta 58A, or any Shure microphone with a tapered handle.
12" Chrome Gooseneck
Shure G12 12" Chrome Gooseneck
12 inch (30.48 cm) chrome gooseneck.
Heavy Duty Mounting Flange
Shure A13HD Heavy Duty Mounting Flange
Heavy duty mounting flange, Silver.
Heavy Duty Mounting Flange, black finish
Shure A13HDB Heavy Duty Mounting Flange, black finish
A heavy-duty mounting flange with black finish.
Windscreen
Shure A85WS Windscreen
Foam windscreen for SM85, SM86, SM87A, Beta 87A, Beta 87C and BG5.1 microphones.
5/8"-27 Threaded Mounting Flange for Gooseneck Microphone in Matte Silver
Shure A12 5/8"-27 Threaded Mounting Flange for Gooseneck Microphone in Matte Silver
Shure's A12 is a 5/8"-27 threaded mounting flange for gooseneck microphones in matte silver.
Desktop Microphone Stand
Shure S37A Desktop Microphone Stand
Shure's S37A low-profile desktop microphone stand is designed for use with various Shure swivel adapters and shock mounts and has a non-reflective, textured, gray finish.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Foam windscreen (gray)
Shure A1WS Foam windscreen (gray)
Gray foam windscreen for 10A, all 515 Series, Beta 56, Beta 56A and Beta 57 microphones.

Usually ships in 7-14 business days.
Need it sooner? Call us!

Shure 515SDX
Cardioid Dynamic, Handheld, High or Low Impedance (Plug Selectable), Locking On/Off Switch.

OUR PART #  515SDX

Product Information:

The Shure Model 515SDX is a dual-impedance, cardioid (unidirectional) dynamic microphone that is suitable for speech pickup in schools, churches, and meeting rooms. Its unidirectional polar pattern greatly reduces feedback.


The 515SDX includes a locking ON/OFF switch and an internal impedance selection socket mounted on the XLR connector for switching between high and low impedance. A slip-in swivel adapter is supplied for stand-mounted use.



Features
  • Rolled-off low-frequency response combined with a smooth high-frequency rise for clear and intelligible voice pickup
  • Symmetrical cardioid pickup pattern minimizes feedback
  • Neodymium magnet for high signal-to-noise ratio
  • Shock-mounted cartridge that minimizes handling noise
  • Lockable ON/OFF switch
  • Dual impedance selectable by internal socket
  • Slip-in swivel adapter for stand-mounted use
  • Three-pin professional audio connector, the industry standard, for maximum interchangeability of cables
  • Tough, die-cast grille resists wear from constant use and handling
  • Field serviceable and backed by the Shure 2-year warranty
Specifications
  • Type: Dynamic
  • Frequency Response: 80 to 15,000 Hz
  • Polar Pattern: Cardioid (unidirectional)
  • Impedance
    • LO Z: Microphone rating impedance is 150 ohms (270 ohms actual) for connection to inputs rated low impedance
    • HI Z: Microphone impedance is “High” for connections to high-impedance microphone inputs.
  • Output Level (at 1,000 Hz), Open Circuit Voltage:
    • LO Z: -56.0 dBV/Pa (1.6 mV)
    • HI Z: -37.5 dBV/Pa (14 mV)
  • Phasing: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 in both HI Z and LO Z modes
  • Switch: Built-in ON/OFF switch, lockplate to lock switch ON
  • Connector: Three-pin professional (male XLR) type
  • Cartridge Shock Mount: Internal rubber vibration-isolator
  • Swivel Adapter: Positive action, break-resistant, adjustable through 180 degrees, slip-out removal for handheld use, designed for mounting on stand with 5/8 in.–27 thread
  • Case: Platinum beige enamel die casting with platinum beige die-cast grille and stainless steel screen
  • Dimensions: 6.567" (167 mm) length, 1.5" (3.81 cm) head diameter
  • Net Weight: 11.1 oz (315 grams)
  • Furnished Accessory: Swivel Adapter
Replacement Microphone Stand Adapter
Shure A25DM Replacement Microphone Stand Adapter
10 pac of replacement microphone stand adapter for tapered barrel vocal microphones.
Microphone Isolation Mount
Shure A55M Microphone Isolation Mount
Shock Stopper isolation mount reduces transmission of mechanical noise and vibration by more than 20 decibels. Compatible with models SM57, SM58, Beta 58A, or any Shure microphone with a tapered handle.
12" Chrome Gooseneck
Shure G12 12" Chrome Gooseneck
12 inch (30.48 cm) chrome gooseneck.
Heavy Duty Mounting Flange
Shure A13HD Heavy Duty Mounting Flange
Heavy duty mounting flange, Silver.
Heavy Duty Mounting Flange, black finish
Shure A13HDB Heavy Duty Mounting Flange, black finish
A heavy-duty mounting flange with black finish.
Windscreen
Shure A85WS Windscreen
Foam windscreen for SM85, SM86, SM87A, Beta 87A, Beta 87C and BG5.1 microphones.
5/8"-27 Threaded Mounting Flange for Gooseneck Microphone in Matte Silver
Shure A12 5/8"-27 Threaded Mounting Flange for Gooseneck Microphone in Matte Silver
Shure's A12 is a 5/8"-27 threaded mounting flange for gooseneck microphones in matte silver.
Desktop Microphone Stand
Shure S37A Desktop Microphone Stand
Shure's S37A low-profile desktop microphone stand is designed for use with various Shure swivel adapters and shock mounts and has a non-reflective, textured, gray finish.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Foam windscreen (gray)
Shure A1WS Foam windscreen (gray)
Gray foam windscreen for 10A, all 515 Series, Beta 56, Beta 56A and Beta 57 microphones.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM