Switchcraft 12B
1/4" Stereo 3-Conductor Jack with Nut & Washer, Double-Open Circuit

OUR PART #  12B


MIL jacks mate with MIL-type phone plugs with .25 inch (6.35mm) or .21 inch (5.34mm) diameter bushings. Numbers C11 and C12B have a non-turn locating pin which keys the jack to the mounting surface. For low contact resistance applications, jack number C12A has fine silver contacts on shunts and tip springs.

Mechanical Specifications:

  • Life, Commercial Jacks: 10,000 insertion/withdrawal cycles, minimum.
  • Life, Military Jacks: 20,000 insertions/withdrawals, minimum.
  • Mechanical Shock: Military Jacks - Per MIL-STD 202, method 213, Test Condition H (75g).
  • Vibration: Military Jacks - Per MIL-STD-202, method 213, (10-55 Hz).

Electrical Specifications:

  • Contact Resistance
         * Commercial Jacks - .030ohms max (initial), .050 ohms max (after humidity, durability exposure). PerMIL-STD-202E.
         * MilitaryJacks - .010 ohms max (initial), .020 ohms max (after life), .10 ohms max(after salt spray).
  • Insulation Resistance:
         * Commercial Jacks -10,000 M(omega) min (initial), 1,000 M(omega) min (afterhumidity).
         * Military Jacks - 10,000M(omega) min (initial), 1,000 M(omega) min (after humidity, durabilityexposure).
  • Dielectric Withstanding Voltage: 500 V, 60 Hz (rms)AC.
  • Contact Rating: 1 A, 25 V DC.

Environmental Specifications:

  • Thermal Range:
         * Commercial Jacks; -55°C to+85°C (non- operating); -20°C to +65°C (operating)
         * Military Jacks; -55°C to +85°C(non-operating); -40°C to +65°C (operating)
  • Thermal Shock:
         * Commercial Jacks - PerMIL-STD 202, method 107
         * MilitaryJacks - Per MIL-STD 202, method 107
  • Humidity:
         * Commercial Jacks - Per MIL-STD202, method 106
         * MilitaryJacks - 0% to 95% operating and non-operating
  • Salt Spray:
         * Commercial Jacks - Per MIL-STD202, method 101
         * MilitaryJacks - Per MIL-STD 202, method 101 (48 hours)
  • Moisture Resistance: Military Jacks - Per MIL-STD 202, method 106 (240hours)

Material Specifications:

  • Mounting Bushing: Nickel-plated copper alloy.
  • Insulation: Rigid plastic.
  • Springs: Special copper alloy. Integral contacts arestandard in the isolated switching circuits; fine silver contacts in C12Aswitching circuit.
  • Sleeve Terminal: Copper alloy.
  • Hardware: Supplied with one Number P10001 copper alloy nickel-plated hexnut, and one Number S1022 steel nickel-plated washer - except copper alloynickel-plated washer

Switchcraft 12B
1/4" Stereo 3-Conductor Jack with Nut & Washer, Double-Open Circuit

OUR PART #  12B

Product Information:

MIL jacks mate with MIL-type phone plugs with .25 inch (6.35mm) or .21 inch (5.34mm) diameter bushings. Numbers C11 and C12B have a non-turn locating pin which keys the jack to the mounting surface. For low contact resistance applications, jack number C12A has fine silver contacts on shunts and tip springs.

Mechanical Specifications:

  • Life, Commercial Jacks: 10,000 insertion/withdrawal cycles, minimum.
  • Life, Military Jacks: 20,000 insertions/withdrawals, minimum.
  • Mechanical Shock: Military Jacks - Per MIL-STD 202, method 213, Test Condition H (75g).
  • Vibration: Military Jacks - Per MIL-STD-202, method 213, (10-55 Hz).

Electrical Specifications:

  • Contact Resistance
         * Commercial Jacks - .030ohms max (initial), .050 ohms max (after humidity, durability exposure). PerMIL-STD-202E.
         * MilitaryJacks - .010 ohms max (initial), .020 ohms max (after life), .10 ohms max(after salt spray).
  • Insulation Resistance:
         * Commercial Jacks -10,000 M(omega) min (initial), 1,000 M(omega) min (afterhumidity).
         * Military Jacks - 10,000M(omega) min (initial), 1,000 M(omega) min (after humidity, durabilityexposure).
  • Dielectric Withstanding Voltage: 500 V, 60 Hz (rms)AC.
  • Contact Rating: 1 A, 25 V DC.

Environmental Specifications:

  • Thermal Range:
         * Commercial Jacks; -55°C to+85°C (non- operating); -20°C to +65°C (operating)
         * Military Jacks; -55°C to +85°C(non-operating); -40°C to +65°C (operating)
  • Thermal Shock:
         * Commercial Jacks - PerMIL-STD 202, method 107
         * MilitaryJacks - Per MIL-STD 202, method 107
  • Humidity:
         * Commercial Jacks - Per MIL-STD202, method 106
         * MilitaryJacks - 0% to 95% operating and non-operating
  • Salt Spray:
         * Commercial Jacks - Per MIL-STD202, method 101
         * MilitaryJacks - Per MIL-STD 202, method 101 (48 hours)
  • Moisture Resistance: Military Jacks - Per MIL-STD 202, method 106 (240hours)

Material Specifications:

  • Mounting Bushing: Nickel-plated copper alloy.
  • Insulation: Rigid plastic.
  • Springs: Special copper alloy. Integral contacts arestandard in the isolated switching circuits; fine silver contacts in C12Aswitching circuit.
  • Sleeve Terminal: Copper alloy.
  • Hardware: Supplied with one Number P10001 copper alloy nickel-plated hexnut, and one Number S1022 steel nickel-plated washer - except copper alloynickel-plated washer
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM