Doug Fleenor Designs Products

Browse by Model/Part #

Doug Fleenor Designs XFMR Transformer for PRE10A, RERUN-A and ES2
Doug Fleenor Designs XFMR Transformer for PRE10A, RERUN-A and ES2
the model xfmr is a class 2 "doorbell" transformer. it is suitable for use with the pre10-a, pre10-a2, es2 and rerun-a.doug fleenor designs xfmr transformer specifications: ac input (primary): 120vac output secondary (rms): 10v, 1.2apower ...
Doug Fleenor Designs PRE10-P Console, DMX512, Portable, 10 Preset
Doug Fleenor Designs PRE10-P Console, DMX512, Portable, 10 Preset
the preset 10 portable [pre10p] can act as a backup for any dmx512 lighting console or as a stand-alone dmx512 preset console. the pre10p is a dmx512 playback device that can take up to ten snapshots from a dmx console and play them back ...
Doug Fleenor Designs PRE10-A DMX512 10-Zone Wall Controller
Doug Fleenor Designs PRE10-A DMX512 10-Zone Wall Controller
the doug fleenor designs  preset 10 architectural is a dmx512 based architectural system capable of storing up to ten presets. these presets are recorded by capturing the output of a dmx512 console. each preset can then be assigned a ...
Doug Fleenor Designs 125-5 1 to 5 DMX Isolation Amplifier and Splitter
Doug Fleenor Designs 125-5 1 to 5 DMX Isolation Amplifier and Splitter
the doug fleenor design 125-5 dmx512 isolated splitter /amplifier provides 5 outputs from a single dmx512 input. it also amplifies and isolates the signal as well.it allows the dmx signal to be split without the possibility of ...
» Products Currently Filtered by: Sales
Showing Products 1 - 24 of 35
Page 12 NEXT»
Sort by:
Display:
Doug Fleenor Designs XFMR Transformer for PRE10A, RERUN-A and ES2

Doug Fleenor Designs XFMR Transformer for PRE10A, RERUN-A and ES2

The model XFMR is a class 2 "doorbell" transformer. It is suitable for use with the PRE10-A, PRE10-A2, ES2 and RERUN-A.Doug Fleenor Designs XFMR Transformer Specifications: AC Input (Primary): 120VAC Output Secondary (RMS): 10V, 1.2APower ...
Doug Fleenor Designs PRE10-P Console, DMX512, Portable, 10 Preset

Doug Fleenor Designs PRE10-P Console, DMX512, Portable, 10 Preset

The Preset 10 Portable [PRE10P] can act as a backup for any DMX512 lighting console or as a stand-alone DMX512 preset console. The PRE10P is a DMX512 playback device that can take up to ten snapshots from a DMX console and play them back ...
Doug Fleenor Designs PRE10-A DMX512 10-Zone Wall Controller

Doug Fleenor Designs PRE10-A DMX512 10-Zone Wall Controller

The Doug Fleenor Designs  Preset 10 Architectural is a DMX512 based architectural system capable of storing up to ten presets. These presets are recorded by capturing the output of a DMX512 console. Each preset can then be assigned a ...
Doug Fleenor Designs 125-5 1 to 5 DMX Isolation Amplifier and Splitter

Doug Fleenor Designs 125-5 1 to 5 DMX Isolation Amplifier and Splitter

The Doug Fleenor Design 125-5 DMX512 Isolated Splitter /Amplifier provides 5 outputs from a single DMX512 input. It also amplifies and isolates the signal as well.It allows the DMX signal to be split without the possibility of ...
Doug Fleenor Designs PRE10-A-POPO DMX512 Wall Zone Controller

Doug Fleenor Designs PRE10-A-POPO DMX512 Wall Zone Controller

The Doug Fleenor Design Preset 10 Architectural is a DMX512 playback device that can take up to ten snapshots from a DMX console and play them back at the press of a button. Fade times can be set from 0 to 999 seconds (default is 2 ...
Doug Fleenor Designs DMX12DIM-ELV 12 Channel 100W Rack Mount Dimmer - Reverse Phase

Doug Fleenor Designs DMX12DIM-ELV 12 Channel 100W Rack Mount Dimmer - Reverse Phase

The DMX12DIM-ELV from Doug Fleenor Design is a 12 channel, 100 Watt per channel dimmer pack that is fed by a single 120VAC 15A branch circuit. Each of the dimmers can be separately controlled using a DMX512-based lighting controller. The ...
Doug Fleenor Designs DMX1REL20A  1 Channel Relay Pack with 120/240V Output

Doug Fleenor Designs DMX1REL20A 1 Channel Relay Pack with 120/240V Output

Doug Fleenor Design makes a series of Relay Packs that are controlled by DMX512.  The DMX1REL20A is a single channel unit, designed to switch up to a 20 amp line voltage load, and uses a 30 amp relay.  The unit is provided with ...
Doug Fleenor Designs DMXTSTR DMX512 Line Tester

Doug Fleenor Designs DMXTSTR DMX512 Line Tester

The DMX512 Line Tester instantly displays the presence of the +Data and -Data signals when plugged into a DMX control line or feed-through connector. Observing the indicators while fading all the dimmers from zero to full will detect if ...
Doug Fleenor Designs DMX2MPX DMX to Microplex Converter

Doug Fleenor Designs DMX2MPX DMX to Microplex Converter

The Doug Fleenor Design DMX to Microplex interface is capable of converting DMX512 to Sunn, ETA, NSI, Leprecon or Lightronics versions of Microplex. Since each of these manufactures uses unique timings the DMX to Microplex interface ...
Doug Fleenor Designs DMX6REL30A 6-Channel DMX512 Line Voltage Controlled Relay Pack with 2x 18" Pigtails

Doug Fleenor Designs DMX6REL30A 6-Channel DMX512 Line Voltage Controlled Relay Pack with 2x 18" Pigtails

Doug Fleenor Design makes a series of relay packs that are controlled by DMX512.  This 6-channel unit, designed to switch line voltage loads up to 15 amps, uses 30 amp relays.  Line voltage input is on two 18" 12/3 SJ pigtails ...
Doug Fleenor Designs ES2 Entry Station Two with 2 User-Assignable Buttons

Doug Fleenor Designs ES2 Entry Station Two with 2 User-Assignable Buttons

Doug Fleenor Design's Entry Station Two is a simplified entry station with two user assignable buttons.  The buttons can be associated with any preset on the master.  Presets are recalled by pressing one of the buttons.Entry ...
Doug Fleenor Designs PRE10-P-RST-01 Console, DMX512, Portable, 10 Preset

Doug Fleenor Designs PRE10-P-RST-01 Console, DMX512, Portable, 10 Preset

The Preset 10 Portable [PRE10P] can act as a backup for any DMX512 lighting console or as a stand-alone DMX512 preset console. The PRE10P is a DMX512 playback device that can take up to ten snapshots from a DMX console and play them back ...
Doug Fleenor Designs TERM DMX512 Terminator, 5-pin

Doug Fleenor Designs TERM DMX512 Terminator, 5-pin

The DMX Terminator plugs into the feed-through connector of the final DMX device on a control cable. Using the DMX Terminator improves signal reliability by preventing reflections and reducing ringing. The DMX Terminator features a "happy" ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Doug Fleenor Designs SW-1 DMX Single A/B Switch Box

Doug Fleenor Designs SW-1 DMX Single A/B Switch Box

The Doug Fleenor Design SW-1 series of selector switches was specifically designed to switch DMX512 signals. Originally designed to switch between primary and backup consoles, these switches are often used to select from two (or more) ...
Doug Fleenor Designs 123 1x3 DMX Isolation Amplifier And Splitter

Doug Fleenor Designs 123 1x3 DMX Isolation Amplifier And Splitter

The Doug Fleenor Design 123 DMX splitter offers three outputs from a single DMX input. Each output is electrically isolated from the input, and from every other output, by 2500 volt optical couplers. Each output has its own line driver and ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Doug Fleenor Designs RK16-1  Rack Kit

Doug Fleenor Designs RK16-1 Rack Kit

This unit is a rack kit; one 16" wide gray chassis in 1U.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Doug Fleenor Designs GIZMO DMX512 Test Box

Doug Fleenor Designs GIZMO DMX512 Test Box

The Gizmo is a DMX512 test tool with features useful for lighting system setup, testing, troubleshooting, and commissioning. With the Gizmo you can transmit, receive, save, playback scenes and perform a variety of data and cable tests. It ...

Usually ships in 7-14 business days.
Doug Fleenor Designs DMX12ANL-TB  12 Channel DMX to Analog Converter with Terminal Block

Doug Fleenor Designs DMX12ANL-TB 12 Channel DMX to Analog Converter with Terminal Block

The Doug Fleenor Design DMX12ANL is a 12 channel DMX512 to analog 0-10V interface with pluggable terminal blocks for the DMX512 in and thru connections. The analog outputs appear on the pluggable terminal blocks. Each analog output is ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Doug Fleenor Designs 1211 DMX Isolated Splitter, 1x11

Doug Fleenor Designs 1211 DMX Isolated Splitter, 1x11

The Doug Fleenor Design 1211 DMX 512 Isolated Splitter has 11 outputs from a single DMX input. Doug Fleenor Design 1211 Specifications: Input circuit: EIA-485 receiver with 120 ohmtermination resistor between +Data and -Data Input ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Doug Fleenor Designs 2322DMX  RS-232 to DMX Interface

Doug Fleenor Designs 2322DMX RS-232 to DMX Interface

The Doug Fleenor Design RS-232 to DMX interface allows advanced A/V control systems and computers to operate standard DMX512 devices such as dimmers and moving lights. It can also be used to allow an RS-232-based control system to receive ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Doug Fleenor Designs RK6-1  1RU Rack Kit for 6.5" Stepladder Series Chassis in Gray

Doug Fleenor Designs RK6-1 1RU Rack Kit for 6.5" Stepladder Series Chassis in Gray

Doug Fleenor Design's RK6-1 rack mount kit adapts products that use the 6.5" Stepladder Series Chassis to a standard 19" rack.  These products include the model 121,123, DMX1REL20A, DMX2REL5A, DMX2MPX, etc.Parts (shown above in red - ...

Usually ships in 7-14 business days.
Doug Fleenor Designs PRE8-D  Preset 8 Desktop 8 "Snapshot" Sliders with Intensity Control

Doug Fleenor Designs PRE8-D Preset 8 Desktop 8 "Snapshot" Sliders with Intensity Control

The Doug Fleenor Design Preset 8 is a lighting control station that stores eight preset looks. Each look, or scene, has an associated slider that adjusts the light levels for that look. The preset looks are recorded into the Preset 8 by ...

Usually ships in 7-14 business days.
Doug Fleenor Designs PRE10-P-POPO Portable DMX512 Console, Push On/Push Off

Doug Fleenor Designs PRE10-P-POPO Portable DMX512 Console, Push On/Push Off

The Preset 10 Portable [PRE10P] can act as a backup for any DMX512 lighting console or as a stand-alone DMX512 preset console. The PRE10P is a DMX512 playback device that can take up to ten snapshots from a DMX console and play them back ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Doug Fleenor Designs PRE10-A2 Preset 10 Architectural, 2-Gang

Doug Fleenor Designs PRE10-A2 Preset 10 Architectural, 2-Gang

The Preset 10 Architectural Two is a further development of our popular Preset 10 Architectural controller. The Preset 10 Architectural Two (PRE10A2) offers new features and different wiring options. The new features of the PRE10A2 include ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Showing Products 1 - 24 of 35
Page 12 NEXT»
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM